Name : Dr. V. Arumugam
Designation : Professor
Contact Details : 044 – 22516176
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
Expertise : Composite Materials, NDT, Flight Mechanics
-
Academic Qualification
Degree
Institution
University /
Board
Year of Passing
Ph.D.
Department of Aerospace Engg, MIT
Anna University
2012
M.E. (Aero)
Madras Institute of Technology
Anna University
2002
B. Tech. (Aero)
Madras Institute of Technology
Anna University
1991
B.Sc., Physics
St. John's College
Madurai Kamaraj University
1988
-
Professional Experience
Period
Post Held
Name of the institution
Nature of Duties
2014 - till date
Associate Prof
MIT Campus
Academic/Research/DCOE
2009 - 2014
Assistant Prof
MIT Campus
Academic/Research/DCOE
2005-2009
Visiting Faculty
MIT Campus
Academic/Research
2003-2005
Assistant Prof
Madha Engineering College
Teaching
1995-2003
Principal/HOD
Bharath Polytechnic college
Teaching/
Administration
1991-1995
Lecturer
ATA Polytechnic college
Teaching
-
Journal Publications
SI. NO
Title
Year
Impact Factor
1
CS Kumar, V Arumugam, C Santulli, “Characterization of indentation damage resistance of hybrid composite laminates using acoustic emission monitoring”, Composites Part B: Engineering 111, 165-178.
2017
7.635
2
R. Boominathan, V. Arumugam, C. Santulli, A. Adhithya Plato Sidharth, R. Anand Sankar, B.T.N. Sridhar, “Acoustic emission characterization of the temperature effect on falling weight impact damage in carbon/epoxy laminates”, Composites Part B: Engineering 56, 591-598.
2014
7.635
3
R Suvarna, V Arumugam, DJ Bull, AR Chambers, C Santulli, “Effect of temperature on low velocity impact damage and post-impact flexural strength of CFRP assessed using ultrasonic C-scan and micro-focus computed tomography”, Composites Part B: Engineering 66, 58-64.
2014
7.635
4
J Kakakasery, V Arumugam, K Abdul Rauf, D Bull, AR Chambers, C. Scarponi, C. Santulli, “Cure cycle effect on impact resistance under elevated temperatures in carbon prepreg laminates investigated using acoustic emission”, Composites Part B: Engineering 75, 298-306.
2015
7.635
5
V Arumugam, K Saravanakumar, C Santulli, “Damage characterization of stiffened glass-epoxy laminates under tensile loading with acoustic emission monitoring”, Composites Part B: Engineering 147, 22-32.
2018
7.635
6
CS Kumar, M Fotouhi, M Saeedifar, V Arumugam, “Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates”, Composites Part B: Engineering 173, 106962.
2019
7.635
7
HN Dhakal, F Sarasini, C Santulli, J Tirillò, Z Zhang, V Arumugam, “Effect of basalt fibre hybridisation on post-impact mechanical behaviour of hemp fibre reinforced composites”, Composites Part A: Applied Science and Manufacturing 75, 54-67.
2015
6.444
8
V Arumugam, RN Shankar, BTN Sridhar, AJ Stanley, “Ultimate strength prediction of carbon/epoxy tensile specimens from acoustic emission data”, Journal of Materials Science & Technology 26 (8), 725-729.
2010
6.155
9
JJ Andrew, V Arumugam, K Saravanakumar, HN Dhakal, C Santulli, “Compression after impact strength of repaired GFRP composite laminates under repeated impact loading”, Composite structures 133, 911-920.
2015
5.138
10
CS Kumar, V Arumugam, HN Dhakal, R John, “Effect of temperature and hybridisation on the low velocity impact behavior of hemp-basalt/epoxy composites”, Composite Structures 125, 407-416.
2015
5.138
11
JJ Andrew, V Arumugam, DJ Bull, HN Dhakal, “Residual strength and damage characterization of repaired glass/epoxy composite laminates using AE and DIC”, Composite Structures 152, 124-139.
2016
5.138
12
JJ Andrew, V Arumugam, C Santulli, “Effect of post-cure temperature and different reinforcements in adhesive bonded repair for damaged glass/epoxy composites under multiple quasi-static indentation loading”, Composite Structures 143, 63-74.
2016
5.138
13
SK Chelliah, P Parameswaran, S Ramasamy, A Vellayaraj, S Subramanian, “Optimization of acoustic emission parameters to discriminate failure modes in glass–epoxy composite laminates using pattern recognition”, Structural Health Monitoring 18 (4), 1253-1267.
2019
4.87
14
JJ Andrew, V Arumugam, C Ramesh, “Acoustic emission characterization of local bending behavior for adhesively bonded hybrid external patch repaired glass/epoxy composite laminates”, Structural Health Monitoring 18 (3), 739-756
2019
4.87
15
K Saravanakumar, C Suresh Kumar, V Arumugam, “Damage monitoring of glass/epoxy laminates with different interply fiber orientation using acoustic emission”, Structural Health Monitoring, 1475921720939064
2020
4.87
16
K Saravanakumar, N Farouk, V Arumugam, “Effect of fiber orientation on mode-I delamination resistance of glass/epoxy laminates incorporated with milled glass fiber fillers”, Engineering Fracture Mechanics 199, 61-70.
2018
3.426
17
K Saravanakumar, V Arumugam, “Effect of milled glass fibers on quasi-static indentation and tensile behavior of tapered laminates under acoustic emission monitoring”, Engineering Fracture Mechanics 201, 36-46.
2018
3.426
18
HN Dhakal, V Arumugam, A Aswinraj, C Santulli, ZY Zhang, A. Lopez Arraiza, “Influence of temperature and impact velocity on the impact response of jute/UP composites”, Polymer testing 35, 10-19.
2014
3.275
19
JJ Andrew, V Arumugam, C Ramesh, S Poorani, C Santulli, “Quasi-static indentation properties of damaged glass/epoxy composite laminates repaired by the application of intra-ply hybrid patches”, Polymer Testing 61, 132-145.
2017
3.275
20
S Sajith, V Arumugam, HN Dhakal, “Comparison on mechanical properties of lignocellulosic flour epoxy composites prepared by using coconut shell, rice husk and teakwood as fillers” Polymer Testing 58, 60-69.
2017
3.275
21
S Sajith, V Arumugam, HN Dhakal, “Effects of curing pressure on mode II fracture toughness of uni-directional GFRP laminates”, Polymer Testing 48, 59-68
2015
3.275
22
K Saravanakumar, H Subramanian, V Arumugam, HN Dhakal, “Influence of milled glass fillers on the impact and compression after impact behavior of glass/epoxy composite laminates”, Polymer Testing 75, 133-141.
2019
3.275
23
JJ Andrew, V Arumugam, HN Dhakal, “Effect of intra-ply hybrid patches and hydrothermal aging on local bending response of repaired GFRP composite laminates”, Molecules 25 (10), 2325.
2020
3.267
24
HN Dhakal, H Ghasemnejad, ZY Zhang, SO Ismail, V Arumugam, “The post-impact response of flax/UP composite laminates under low velocity impact loading”, International Journal of Damage Mechanics 28 (2), 183-199.
2019
3.125
25
JJ Andrew, V Arumugam, “Effect of patch hybridization on the tensile behavior of patch repaired glass/epoxy composite laminates using acoustic emission monitoring”, International Journal of Adhesion and Adhesives 74, 155-166.
2017
2.671
26
CS Kumar, V Arumugam, R Sengottuvelusamy, S Srinivasan, HN Dhakal, “Failure strength prediction of glass/epoxy composite laminates from acoustic emission parameters using artificial neural network”, Applied Acoustics 115, 32-41.
2017
2.44
27
R Bhoominathan, V Arumugam, T Ashok, AJ Jefferson, “Residual strength estimation of CFRP laminates subjected to impact at different velocities and temperatures”, Polymer Composites 38 (10), 2182-2191.
2017
2.265
28
V Arumugam, JJ Andrew, “Effect of patch hybridization on the compression behavior of patch repaired glass/epoxy composite laminates using acoustic emission monitoring”, Polymer Composites 39 (6) 1922-1935.
2018
2.265
29
S Kannivel, K Periasamy, A Vellayaraj, “Impact response and post‐impact performance of unidirectional and crossply carbon/epoxy laminates modified with milled glass fibers”, Polymer Composites 40 (6), 2441-2451.
2019
2.265
30
V Arumugam, B Kumar, C Santulli, AJ Stanley, “Effect of fiber orientation in unidirectional glass epoxy laminate using acoustic emission monitoring”, Acta Metallurgica Sinica(English Letters) 24 (5), 351-364.
2011
2.09
31
R Asokan, V Arumugam, C Santulli, AJ Stanley, “Acoustic emission monitoring of repaired composite laminates”, Journal of Reinforced Plastics and Composites 31 (18), 1226-1235
2012
1.987
32
V Arumugam, AAP Sidharth, C Santulli, “Failure modes characterization of impacted carbon fibre reinforced plastics laminates under compression loading using acoustic emission”, Journal of Composite Materials 48 (28), 3457-3468.
2014
1.972
33
KM Bak, K Kalaichelvan, V Arumugam, “A novel approach for classification of failure modes in single lap joints using acoustic emission data”, Journal of Composite Materials 48 (24), 3003-3017.
2014
1.972
34
R Balan, V Arumugam, KA Rauf, AAP Sidharth, C Santulli, “Estimation of residual flexural strength of unidirectional glass fiber reinforced plastic composite laminates under repeated impact load”, Journal of Composite Materials 49 (6), 713-722.
2015
1.972
35
A Jayababu, V Arumugam, B Rajesh, CS Kumar, “Investigation of indentation damage resistance on normal and inclined plane of glass/epoxy composite laminates using acoustic emission monitoring”, Journal of Composite Materials, 10.1177/0021998320906864
2020
1.972
36
V Arumugam, S Sajith, AJ Stanley, “Acoustic emission characterization of failure modes in GFRP laminates under mode I delamination”, Journal of Nondestructive Evaluation 30 (3), 213-219.
2011
1.95
37
CS Kumar, V Arumugam, S Sajith, HN Dhakal, R John, “Acoustic emission characterisation of failure modes in hemp/epoxy and glass/epoxy composite laminates” Journal of Nondestructive Evaluation 34 (4), 31.
2015
1.95
38
C Ramesh, H Ragesh, V Arumugam, AJ Stanley, “Effect of hydrolytic ageing on Kevlar/polyester using acoustic emission monitoring”, Journal of Nondestructive Evaluation 31 (2), 140-147
2012
1.95
39
K Saravanakumar, BS Lakshminarayanan, V Arumugam, “Effect of thickness and denting behavior of glass/epoxy laminates subjected to quasi-static indentation (QSI) loading under acoustic emission monitoring”, Journal of Nondestructive Evaluation 37 (3), 63.
2018
1.95
40
K Saravanakumar, V Arumugam, R Souhith, C Santulli, “Influence of Milled Glass Fiber Fillers on Mode I & Mode II Interlaminar Fracture Toughness of Epoxy Resin for Fabrication of Glass/Epoxy Composites”, Fibers 8 (6), 36.
2020
1.92
41
V Arumugam, AAP Sidharth, C Santulli, “Characterization of failure modes in compression-after impact of glass–epoxy composite laminates using acoustic emission monitoring”, Journal of the Brazilian Society of Mechanical Sciences and Engineering 37, 1445-1455.
2015
1.755
42
V Arumugam, CS Kumar, C Santulli, F Sarasini, AJ Stanley, “Identification of failure modes in composites from clustered acoustic emission data using pattern recognition and wavelet transformation”, Arabian Journal for Science and Engineering 38 (5), 1087-1102.
2013
1.711
43
V Arumugam, SV Karthikeyan, BTN Sridhar, AJ Stanley, “Characterization of Failure Modes in Composite Laminates Under Flexural Loading Using Time-Frequency Analysis”, Arabian Journal for Science and Engineering 38 (6), 1471-1480
2013
1.711
44
SK Chelliah, SK Kannivel, A Vellayaraj, “Characterization of failure mechanism in glass, carbon and their hybrid composite laminates in epoxy resin by acoustic emission monitoring”, Nondestructive Testing and Evaluation 34 (3), 254-266.
2019
1.424
45
C Suresh Kumar, V Arumugam, JJ Kenned, R Karthikeyan, AR Jac Fredo, “Experimental investigation on the effect of glass fiber orientation on impact damage resistance under cyclic indentation loading using AE monitoring”, Nondestructive Testing and Evaluation, 1-19.
2019
1.424
46
S Kannivel, A Vellayaraj, I Kolimi, J Thomas, “Effect of thickness on indentation response and tensile loading behaviour of glass/epoxy laminates under acoustic emission monitoring”, Nondestructive Testing and Evaluation, 1-18.
2020
1.424
47
N Ramasamy, V Arumugam, S Rajkumar, “Surface modification of Kevlar fibre fabric and its influence on the properties of Kevlar/epoxy composites”, Bulletin of Materials Science 42 (4), 173.
2020
1.392
48
JJ Kakkassery, V Arumugam, K Saravanakumar, S Durga, C Santulli, A Pavlović, “Residual strength estimation and damage characterization by acoustic emission of drilled thermally conditioned fiberglass laminates”, FME Transactions 46 (4), 489-496.
2018
1.37
49
N Muralidhar, K Vadivuchezhian, V Arumugam, IS Reddy, “Dynamic mechanical characterization of epoxy composite reinforced with areca nut husk fiber”, Archive of Mechanical Engineering, 57-72.
2020
1.06
50
B Arthurs, DJ Bull, V Arumugam, AR Chambers, C Santulli, “Porosity Effect on Residual Flexural Strength Following Low Energy Impact of Carbon Fibre Composites”, Polymers & Polymer Composites 23 (5), 205 -212.
2015
1.023
51
N Muralidhar, K Vadivuchezhian, V Arumugam, IS Reddy, “Flexural modulus of epoxy composite reinforced with Arecanut husk fibre (AHF): A mechanics approach”, Materials Today: Proceedings 27, 2265-2268.
2020
0.97
52
V Arumugam, CS Kumar, C Santulli, F Sarasini, AJ Stanley, “Identification of failure modes in composites laminates from acoustic emission data using wavelet transformation technique”, Journal of Testing and Evaluation 39 (5), 954-966.
2011
0.877
53
N Muralidhar, V Kaliveeran, V Arumugam, IS Reddy, “A study on Areca nut husk fibre extraction, composite panel preparation and mechanical characteristics of the composites”, Journal of The Institution of Engineers (India): Series D 100 (2), 135-145.
2019
0.84
54
KM Bak, K Kalaichelvan, GK Vijayaraghavan, M Dinesh, V Arumugam, “Study on the effect of adhesive thickness of single lap joints using acoustic emission and FEA”, Insight-Non-Destructive Testing and Condition Monitoring 55 (1), 35-41.
2013
0.8
55
VA Anand, V Arumugam, S Jayalakshmi, AR Singh, “Innovative approach for suppressing corrosion of SS304 steel in saline water environment”, Anti-Corrosion Methods and Materials 65 (5), 484-491.
2018
0.73
56
AV Anand, V Arumugam, R Kannan, “Static wetting characteristics of micro-textured stainless steel surfaces under uniaxial loading condition”, International Journal of Surface Science and Engineering 11 (2), 174-190.
2017
0.607
57
K Saravanakumar, BS Lakshminarayanan, V Arumugam, C Santulli, “Quasi-static indentation behavior of GFRP with milled glass fiber filler monitored by acoustic emission”, Facta Universitatis, Series: Mechanical Engineering 17 (3), 425-443.
2019
0.595
58
V Arumugam, SB Kumar, AJ Stanley, “Effect of fuzzy C means technique in failure mode discrimination of glass/epoxy laminates using acoustic emission monitoring”, Russian Journal of Nondestructive Testing 47 (12), 858-864
2011
0.421
59
AV Anand, S Gollakota, V Hariprasad, N Shunmugavelu, Ashifkhan, V Arumugam, “Wettability characteristics of microgroove patterned SS304 stainless steel surfaces”, AIP Conference Proceedings 2128 (1), 040001.
2019
0.4
60
AV Anand, S Gollakota, V Hariprasad, Ashifkhan, N Shunmugavelu, V Arumugam, “Role of micropatterns on wettability and corrosion characteristics of SS304 steel surface”, AIP Conference Proceedings 2128 (1), 040006.
2020
0.4
61
J Andrew, V Arumugam, AP Sidharth, B Thomas, “Acoustic emission based monitoring of cut-out geometry effects in carbon/epoxy laminates under uni-axial compression”, International Journal of Vehicle Structures & Systems 6 (1/2), 17.
2014
0.38
62
C Ramesh, J Stanley, V Arumugam, J Andrew, S Arunabharathi, “Effect of multiple impacts on GFRP laminates exposed to hydrolytic ageing using acoustic emission monitoring”, International Journal of Vehicle Structures & Systems 6 (1/2), 32
2014
0.38
63
R Asokan, M Dinesh, R Santosh, V Arumugam, JA Stanley, “Experimental Investigation of Failure Mechanisms in GFRP Lap Joint using Acoustic Emission”, International Journal of Vehicle Structures & Systems 4 (2), 48
2012
0.38
64
R Asokan, V Arumugam, C Santulli, S Barath Kumar, A Joseph Stanley, “Investigation of the strength of the failure modes in GFRP laminates using acoustic emission monitoring”, International Journal of Polymers and Technologies 3 (2), 57-65.
2011
65
AJ Jefferson, V Arumugam, C Santulli, A Jennifers, M Poorani, “Failure modes of GFRP after multiple impacts determined by acoustic emission and digital image correlation”, Journal of Engineering and Technology 6(2), 29-51.
2015
66
AJ Jefferson, V Arumugam, H Dhakal, “Repair of polymer composites: methodology, techniques, and challenges”, Woodhead Publishing.
2018
67
C Ramesh, V Arumugam, J Stanley, V Kumar, “Effects of Hydrolytic Aging On Glass/Epoxy, Kevlar/Epoxy, And Hybrid (Glass/Kevlar/Epoxy) Composites”, International Journal of Engineering Research & Technology 2 (5), 1-8.
2013
68
S Sajith, V Arumugam, C Santulli, “Failure Mode Discrimination in Mode II Fracture of Glass/Epoxy Laminates Using Acoustic Emission Technique”, Material Science and Engineering with Advanced Research 1 (2), 16-25.
2016
-
Seminar/FDP/Worshop Attended
- G, V.Arumugam, Dr.A.Joseph Stanley “Analysis and identification of failure mechanism in composite rings using Acoustic emission monitoring”. Golden jubilee International conference on Aerospace science and technology at NAL Bangalore (INCAST 2008-025), June 26-28, 2008
- Bhoominathan, A.Packyaraj, V.Arumugam, Dr.A.Joseph Stanley, “Residual strength prediction of Glass/epoxy laminates through acoustic emission monitoring”. Golden jubilee international conference on aerospace science and technology at NAL Bangalore (INCAST 2008-PO56), June 26-28, 2008
- Bhoominathan, V.Arumugam, Dr.A.Joseph Stanley “Residual strength prediction of Glass/epoxy Cross ply laminates through acoustic emission monitoring”, National conference on advances in robotics, precision Engineering and Manufacturing techniques (AIRPAM2008) MIT Anna University 14-15 March 2008.
- G, V.Arumugam, Dr.A.Joseph Stanley, “Detection of defects in composite rings using acoustic emission monitoring”, National conference on advances in robotics, precision Engineering and Manufacturing techniques (AIRPAM2008) MIT Anna University 14-15 March 2008.
- Arumugam, C. Suresh Kumar, Dr. B.T.N.Sridhar, Dr.A.Joseph Stanley ` Characterization of failure modes in GFRP Laminates from acoustic emission data using unsupervised classifiers. Eighth ISAMPE National conference on Composites December 4-5 2009 p414
- Arumugam , S.Manoj kumar , Dr. B.T.N.Sridhar, Dr.A.Joseph Stanley ` Study of pre induced defects on GFRP composite rings and laminates using acoustic emission monitoring.. Eighth ISAMPE National conference on Composites December 4-5 2009 P439
- Murgaraj G, V.Arumugam, “Characterization of failure modes in hybrid composite laminates using Acoustic Emission monitoring”, Students For Exploration and Development Of Space International Conference2nd - 4th March, 2012.
- Prabakar D S, V.Arumugam, “Study of hydrolytic ageing of Kevlar/polyster composite laminates using acoustic emission technique”, Students for Exploration and Development Of Space International Conference 2nd - 4th March, 2012.
- Dinesh M, Arumugam, Ashokan , R Dhanaraj “Structural Health monitoring of composite lap joints” , “Students For Exploration and Development Of Space International Conference 2nd - 4th March , 2012
- Dinesh M, V.Arumugam, “Ultimate strength Prediction of different fiber orientation composite lap joints” National conference on “Universal Innovations in Mechanical Engineering (UIME12)” feb 10 2012.
-
Guest/Invited Lectures
1. Delivered lecturer on “New materials their Characterization and Application” held at Department of Aerospace Engineering, MIT Campus during 2015.
2. Visiting Lecturer to University of Southampton from Dec 4, 2011 to May 26, 2012 for a period of six months under Royal academy of Engineering, India/China Award.
3. Visited National Institute of Material science campus (NIMS), Kyoto University, Hiroshima University , Nagoya University in Japan -
Sponsored and consultancy Research Projects
Title
Funding Agency
Role
Status
Amount
Augmentation of infrastructural facilities for composite material characterization laboratory
DST FIST 2014
Co-investigator
Approved
Rs 1,40,00,000/-
Design And Development Of A Loom For 3d Spacer Fabric
AR&DB
Co-investigator
Completed
Rs. 6,20,000/-
High Temperature Material Characterization Project
DRDO
Co-investigator
Ongoing
Rs. 4,32,000/-
Thermal Characterization And Analysis Of Carbon-carbon Composites Samples
Graphite India Limited
Principal Investigator
Ongoing
Rs.7, 60,000/-.
Temperature Effect On Falling Weight Impact Damage In Hierarchised Composite Laminates)
AR&DB
Principal Investigator
Approved
Rs 19,83,750/-
Characterization of Composite Sandwich Panel Materials for Radome Structures
DRDO
Principal Investigator
Ongoing
Rs.10,00,000
-
Research scholars currently Guiding
S.No
Scholar Name - (Ph.D)
Title
1
Joseph
Effect of Voids on Impact Damage Under Elevated Temperatures in carbon prepreg
2
Jefferson Andrew J
Residual strength estimation and damage mode investigation of composite laminates subjected to multiple impacts.
3
Suresh Kumar C
Characterization of failure modes in composite laminates using acoustic emission monitoring
4
Sajith
Effect of bio-fillers on mode II delamination.
5
Boominathan R
Effect of temperature on the post impacted flexural strength and damage modes of carbon/epoxy laminates
6
Pakiaraj
Mechanical characterization fiber metal laminates
7
Jayababu.A
Effect of filler particles on the mechanical properties of hybrid composite laminates
8
Ramasamy.N
Effect of microstructure and mechanical behavior of aluminum honey comb structure
9
Usha barathi
Stress corrosion cracking of composite laminates
10
Vivekanand
Stress corrosion resistance of aerospace materials with various ageing treatments
11
Saravanakumar K
Delamination resistance and layup optimization of tapered composite
-
Contribution to Department/Institute
1. Organized two days short term course on “new materials their characterization and application” sponsored under UGC programme during 2015
2. Workshop and store in-charge
3. Deputy controller of Examination ,MIT Campus
4. Organized two days workshop sponsored under UGC programme during 2014 -
Journal Ratings