Degree	Branch/Specialization	Class	Year of Passing	College	University
Ph.D	Faculty in Mechanical Engineering		2009	CEG	Anna University
M.Tech	Manufacturing Engineering	First Class	2001	IIT Madras	IIT Madras
B.E	Mechanical Engineering	First Class	1996	Adhiparashakthi Engg. College	Madras University

 

 

 

 

 

 

International Journals 

1. G.Baskaran, S. Gowri, and R. Krishnamurthy (2009). Effect of fine blanking on hole quality in glass fiber reinforced plastic composites, International journal of Manufacturing Science and Production, Vol.10, No.1, pp. 33-42.

2. G.Baskaran, S. Gowri, and R. Krishnamurthy (2010). Study on vital static properties of fine blanking of GFRP composites with that of conventional drilling, International Journal of Advanced Manufacturing Technology, Vol. 50, 2010, pp. 659 - 666.

3. G.Baskaran, S. Gowri, and K.Thiagarajan (2010). Optimization of fine blanking by improving hole quality in glass fiber reinforced plastic composites through numerical average method, International journal of Materials, Manufacturing and Optimization, Vol.1 (I), January-June 2010, pp. 21-26.

4. G.Baskaran, S.Gowri, and R. Krishnamurthy (2010). The influence of volume fraction of fibers on fine blanked hole quality in GFRP composites, International journal of Production Technology and Management Research. Vol.1 No.1 January-June 2010, pp.1-8

5. N.Venkatesan and G.B.Bhaskar (2011). Plate bending analysis by boundary element method, International Journal of Production Technology and Management Research. Vol.2, Pages: 39-44.

6. K.Pazhanivel, G.B.Bhaskar, S.Arunachalam, V.Hariharan and A.Elayaperumal (2012) Low velocity impact analysis on GFRP laminates under different temperatures, International Journal of Applied Mechanics and Materials, Vol.110-116, pp.632-636.

7. P. Shanmugavel, G.B. Bhaskar, M. Chandrasekaran, P.S. Mani, and S.P.Srinivasan (2012). “An overview of fracture analysis in functionally graded materials”, European

     Journal of Scientific Research, Vol.68, Issue 3, pp.412-439.  

8. N. Venkatesan, G.B.Bhaskar, A. Gnanavel Babu, J. Fredric, S. Vigneshan & R.   Kalaiarasu(2012). “Mechanical Behavior of Various Volume Fractions of High Density Polyethylene Nanoclay Composite”, International Journal of Mechanical Engineering and Material Science, Vol.5, No.1, 2012, pp.1-5.

9. D. RamBabu, G.B.Bhaskar, A. Gnanavelbabu, A. Ratnakar & A. Karthik (2012). “Development of an Algorithm for Nesting with Common Cut Methodology Using Identity Coordinate Function”, International Journal of Production Technology and Management Research, Vol.3, No.1, Pages: 1-10.

10. G. Elumalai and G.B.Bhaskar (2013). “GPS/GSM based intelligent monitoring System for vehicle tracking”, International Journal of Mechanical Engineering and Material Sciences, Vol.6, No.2, pp.141-145.

11. D. Rambabu, A. Lenin, G.B.Bhaskar and A. Gnanavel babu (2013). “Gap analysis and optimization of process involved in product design and development by integrating enterprise resource planning & product lifecycle management”, International Journal of Procedia Engineering, Volume 64, Pages 983–992.

12. Rajesh.S and G.B.Bhaskar (2013). “Modelling and Experimental Analysis of composite leaf spring”, International Journal of Mechanical Engineering and Material Sciences, Vol.6, No.2, pp.163-169.

13. Ramanan.A, Senthilkumar.P, Bhaskar.G.B, “Experimental Study on R744/R134a and R744/R290 Mixture Boiling in Horizontal Tube,” International Journal of Mechanical Engineering and Material Science, Vol. 6, No. 2, 2013, pp. 129 – 132.

14. K. Pazhanivel, N. Ramadoss, K. Poyyathappan, P. Anandan, G.B.Bhaskar (2013).           “Flexural Analysis on GFRP Composites Subjected to Cyclic Gradual Load and Cyclic Impact”, Journal of Advanced Materials Research, Vol.685, pp. 35-39.

15. Santhanamoorthy.P, Bhaskar.G.B,      “Machining, Analysis, Characterization   and Applications of Glass, Carbon and Glass-Carbon Hybrid Composites - A Review,” International Journal of Mechanical Engineering and Material Science, Vol. 6, No. 2, 2013, pp. 153 – 157.

16. Shanmugavel P., Bhaskar G. B. and Chandrasekaran M. (2014),”Experimental Study on Fatigue Characteristics for Aluminium and Al-SiC Composite Material Edge Crack Specimens under Flexural Loading Conditions,” International Journal of Engineering and Technology, Vol. 6, No.1, Feb-Mar 2014, pp. 13 – 27.

17. G.Elumalai and G.B.Bhaskar (2014), “An Intelligent Transport System methodology to identify and controlling of Faulty Vehicles”, Journal of Advanced Materials Research, Vols. 875-877, pp. 2179-2183.

18. Senthilnathan D., Gnanavel Babu A., Bhaskar G B., Gopinath KGS., “Characterization of Glass Fibre – Coconut Coir– Human Hair Hybrid Composites,” International Journal of Engineering and Technology, Vol. 6, No.1, Feb-Mar 2014, pp. 75 – 82.

19. C.Muthazhagan, A.Gnanavel babu, G.B.Bhaskar and K. Rajkumar (2014). “Influence of Graphite Reinforcement on Mechanical Properties of Aluminum-Boron Carbide Composites”, Journal of Advanced Materials Research, Vol. 845, pp. 398-402.

20. Rajesh  S., Bhaskar  G B.,  “ Experimental Investigation on Laminated Composite Leaf springs Subjected to Cyclic Loading,” International Journal of Engineering and Technology, Vol. 6, No.1, Feb-Mar 2014, pp. 95 – 101.

21. Poyyathappan.K,   Manavalan.S,     Bhaskar.G.B.,    Pazhanivel.K,    Venkatesan.N,  “Assessment of Vital Mechanical Properties on Glass-Carbon Hybrid Composites Subjected to Low Frequency Point Loading,”  International Journal of Applied Environmental Sciences, Vol. 9, No. 3, 2014, pp. 887 – 893. 

22. Elumalai G., Bhaskar G B., “Identification and Control of Spark Ignition Type Vehicles using Intelligent Transportation Technologies,” International Journal of Engineering and Technology, Vol. 6, No.1, Feb-Mar 2014, pp. 91 – 94.

23. Rajesh.S, Nakkeran.S, Bhaskar.G.B. , “Laminated Composites as the Material for the Replacement of Conventional Leaf Springs used in Light Commercial Vehicle”, International Journal of Applied Environmental Sciences, Vol. 9, No. 3, 2014, pp. 831 – 836. 

24. Pazhanivel K., Bhaskar  G B., Elayaperumal  A.,  “ Significance of stainless steel wire reinforcement on the mechanical properties of GFRP composites,” International Journal of Engineering and Technology, Vol. 6, No.1, Feb-Mar 2014, pp. 178 – 182.

25. Saravanan.G, Arunraja.K, Thirumavalavan.S, Bhaskar.G.B, Vijayaraghavan.G.K, “Structural and Dynamic Analysis of Composite Stator Vanes in Compressor”, International Journal of Applied Environmental Sciences, Vol. 9, No. 3, 2014, pp. 853– 863.

26. Poyyathappan K., Bhaskar  G B., Pazhanivel  K.,Venkatesan K., “Tensile and flexural studies on glass – carbon hybrid composites subjected to low frequency cycle loading,” International Journal of Engineering and Technology, Vol. 6, No.1, 2014, pp. 178 – 182.

27. Venkatesan.N, Sabarish.R, Poyyathappan.K, Bhaskar.G.B. “Mechanical Properties of Montmorillonite Nanoclay Reinforced High Density Polyethylene Composites”, International Journal of Applied Environmental Sciences, Vol. 9, No. 3, 2014, pp. 865– 870. 

28. Rajesh.S, Nakkeran.S, Bhaskar.G.B. , “A survey of GFRP composite leaf spring” International Journal of Engineering & Technology, Vol 3, No. 2, 2014, pp. 185 – 193.

29. Ramanan.A, Senthilkumar.P, Bhaskar.G.B, “Study of Boiling Heat Transfer and Pressure Drop of R744/R134a and R744/R290 Mixture in a Smooth Horizontal Tube”, International Journal of Applied Environmental Sciences, Volume 9, Number 3 (2014), pp. 637-643. 

30. K. Pazhanivel, G.B. Bhaskar, N. Venkatesan, P. Anandan, S.Arunachalam, “Influence of SMA Short Fibers on Mechanical Properties of Copper/GFRP Composites”, International Journal of Applied Mechanics and Materials, Vol. 591 (2014), pp. 64-67.

31. Rambabu.D, Hariharan.R, Karthik Nambi.A, Nataraj.R, Bhaskar.G.B., “Design and development of human factors based shoe  midsole using additive manufacturing,” International Journal of Engineering & Technology, Vol. 3, No. 2, 2014, pp. 194 - 200.

32. Pazhanivel.K, Sabarish.R, Poyyathappan.K, Bhaskar.G.B, “Impact Analysis on Stainless Steel Wires Embedded GFRP Composites”, International Journal of Applied Environmental Sciences, Vol. 9, No. 3, 2014, pp. 879– 886. 

33. K.Poyyathappan, G.B.Bhaskar, N.Venkatesan, K.Pazhanivel, G.Saravanan, S.Arunachalam, “Dynamic Mechanical and Flexural characteristics of Glass-Carbon Hybrid Composites”, International Journal of Applied Mechanics and Materials, Vol. 591 (2014,) pp. 72-76.

34. Rambabu.D, Gopinath. R, Senthilrajan.U, Bhaskar.G.B, “Weight reduction of a standard brake drum: A design approach”, International Journal of Engineering & Technology, Vol. 3, No. 2, 2014, pp. 201 - 207.

35. N. Venkatesan, G. B. Bhaskar, K. Pazhanivel, K. Poyyathappan, “Reinforcing Effect of Montmorillonite Nanoclay on Mechanical Properties of High Density Polyethylene Nano composites”, International Journal of Applied Mechanics and Materials, Vol. 591 (2014), pp. 60-63.

36. Rambabu.D, Srinivasan.V, Lennin.A, Bhaskar.G.B, “Design and Optimization of Material Selection through the Enterprise Resource Planning and Product Lifecycle Management Integration”, International Journal of Applied Environmental Sciences, Vol. 9, No. 3, 2014, pp. 815 – 822. 

37. S.Rajesh and G.B.Bhaskar, “Response of Composite Leaf Springs to Low Velocity Impact Loading”, International Journal of Applied Mechanics and Materials, Vol. 591 (2014), pp. 47-50.

38. C.Muthazhagan, A. Gnanavelbabu, G.B. Bhaskar and K.Rajkumar, “Corrosion behavior of Aluminium Boron Carbide Graphite Composites”, International Journal of Applied Mechanics and Materials, Vol. 591 (2014), pp. 51-54.

39. D. Ram babu, A. Lenin, G.B. Bhaskar, “Advanced product configuration in manufacturing using enterprise resource planning variant configuration with optimization in manufacturing and assembly processes”, International Journal of Applied Mechanics and Materials, Vol. 591 (2014), pp. 94-97.

40. Rajesh.S, Bhaskar.G.B, Achudhan.M. “Modeling and Analysis of Composite Leaf Springs”, International Journal of Applied Environmental Sciences, Vol. 9, No. 3, 2014, pp. 847– 852. 

41. G.Elumalai, G.B.Bhaskar, R.Subash, “Controlling of Faulty vehicles using GSM and GPS Technology”, International Journal of Applied Mechanics and Materials, Vol. 591 (2014), pp. 180-183

42. Shanmugavel P., Bhaskar G. B. and Chandrasekaran M., ‘Determination of Stress Intensity Factors and Fatigue Characteristics of Al-SiC Composite Material and Al-SiC Functionally Graded Material by Simulation, "International Review of Mechanical Engineering , Vol.8, No.6, 2014. pp. 1017-1029

43. Shanmugavel P., Bhaskar G. B., Chandrasekaran M. and Srinivasan S. P., ‘Determination of Stress Intensity Factors and Fatigue Characteristics for Aluminium, Aluminium-Alumina Composite Material and Aluminium-Alumina FGM Specimens with Edge Crack by Simulation,’ International Journal of Applied Environmental Sciences, Vol. 9, No. 4, 2014, pp. 1759– 1768. 

44. K.Pazhanivel, G.B.Bhaskar, A.Elayaperumal and P.Anandan S.Arunachalam, (2015) ‘Influence of stainless steel wire reinforcement on the impact resistance of GFRP composite laminates’, The Arabian Journal for Science and Engineering, DOI 10.1007/s13369-015-1571-7.pp.1111-1122

45. Palani K, Elanchezhian C and Bhaskar G.B, "Multi Response DEA-Based Taguchi Optimization of Process Parameters on AA8011 Friction Stir Welded Aluminium Alloys" Applied Mechanics and Materials, Volume 766 (2015), Pages: 921-927

46. S.Rajesh, G.B.Bhaskar, C.B.Sekar, V.Muthamizhselvan. “Optimization of composite leaf spring using Taguchi techniques”, International Journal of Applied Engineering Research, Vol. 10, No.42 (2015), pp. 30941– 30946. 

47. P.Santhanamoorthy, S.ShivaSwabnil, G.B.Bhaskar. “Study on drilling characteristics of glass carbon hybrid composite laminates”, International Journal of Applied Engineering Research, Vol. 10, No.42 (2015), pp. 30963– 30968. 

48. K Pazhanivel, G B Bhaskar, A Elayaperumal, P Anandan and S Arunachalam.(2015) "Influence of SMA reinforcement on the impact resistance of GFRP composite laminates under different temperatures", Bulletin of Materials Science - Indian Academy of Sciences, Vol. 39, No.3, pp. 889-899.

49. K.G. Rajasekaran, G.B.Bhaskar, M.Chandrasekaran and S.Murali. A Review on Employing Multi Criteria Decision Making Methods for Supplier Selection, Asian Journal of Research in Social Sciences and Humanities, Vol. 6, No. 6, June 2016, pp. 802-810.

50. Rajesh S, Bhaskar GB, venkatachalam J, Pazhanivel K, Suresh Sagadevan (2016) " Performance of Leaf Springs made of composite Material subjected to Low frequency impact loading" Journal of Mechanical Science and Technology, Vol. 30, No.9 (2016), pp. 4291-4298.

51. K.G. Rajasekaran, G.B.Bhaskar, M.Chandrasekaran and S.Murali. "Identification and Prioritisation of Supplier, Customer and Organization Collaborating Factors Influencing New Product Development" Indian Journal of Applied Research, Volume : 6 | Issue : 7 | July 2016 | pp.535-547.

52. A.Thirumurugan, G.B.Bhaskar, K.Poyyathappan, R. Jai Karthik, M. Kishore Kumar, G. Somasundaram, G. Venkatakrishnan, "Investigations on Aluminium wire mesh, Banana fiber and Glass fiber reinforced hybrid composites" Indian Journal of Science and Technology, Vol 9(42),  November 2016, pp. 1-7.

53. K.G. Rajasekaran, G.B.Bhaskar, S.Murali and M.Chandrasekaran, "An Empirical Study on Selection of Supply Chain Partner by Multi-Criteria Decision Making Method VIKOR - A Case of Automotive Industry" International Journal of Engineering and Technology, Vol.8,  No.6,  Dec 2016-Jan 2017, pp. 2997- 3004.

54. N.Venkatesan, Bhaskar G B, Rajesh S, Pazhanivel K and Suresh Sagadevan (2017) "Effect of Cloisite 30B nano clay on the mechanical properties of HDPE nano composites" Journal of Materials Testing, Vol. 59, No.4, pp. 355-360.

55. Rajesh S, Bhaskar G B, R.Franklin Issac, Pazhanivel K, Suresh Sagadevan and venkatachalam J (2017) " Optimization of composite leaf spring design using response surface methodology " Romanian Journal of Materials, Vol. 47, No.1, pp. 296-302.

 56. R. George sahaya nixon, B. S. Mohanty, G. B. Bhaskar (2017) “Effect of process parameters on physical measurements of AISI316 stainless steel coating on EN24 in friction surfacing” Materials and Manufacturing Processes, Vol. 33, No.7, pp. 778-785.

 

International Conferences

1. G.Baskaran, S. Gowri, S.Arul and R. Krishnamurthy. Mechanical Properties of unidirectional GFRP composites subjected to low cycle fatigue. Proceedings of International Conference on Advanced Materials Processing and Characterization, August- 2006, India. Page: 149-154, Vol- I.

2. G.Baskaran and S.Gowri. Aspects of Dynamic Mechanical Analysis in Glass Fiber Reinforced Plastic Composites. International Conference on Recent Advances in Materials and Processing, Dec-2006, India.

3. N.Venkatesan, K. Muruganandam, G.B.Bhaskar, K.Pazhanivel, P.Anandan and A.Gnanavelbabu. A Critical Review on Nano Clay Related Polymer Composite Material, International Conference on Futuristic Trends in Mechanical Engineering, January 2012, Page: 157-163, India.

4. N.Vasudevan and G.B.Bhaskar. A Review of Cryogenic Cooling in Engineering Materials, International Conference on Futuristic Trends in Mechanical Engineering, January 2012, Page: 164-172, India.

5. D.K.Mohan kumar, J.S.Saravanan, K.Pazhanivel, S.Arunachalam and G.B.Bhaskar. A Review on Impact Studies on Smart Composites, International Conference on Futuristic Trends in Mechanical Engineering, January 2012, Page: 173-177, India.

6. A. Chidambaram, R. Periyardhasan, N. Ramadoss, K. Pazhanivel and G.B.Bhaskar. A Review on Impact Study on Metal Wire Embedded Composites, International Conference on Futuristic Trends in Mechanical Engineering, January 2012, Page: 194-198, India.

7. K.Poyyathappan, K.Pazhanivel, G.B.Bhaskar, S.Arunachalam, M.C.Leninbabu and A.Elayaperumal, Fatigue flexural properties of glass plastic composites subjected to low cyclic impact, 2ndInternational Conference on Mechanical, Production and Automobile Engineering, April 28-29, 2012, Singapore.

8. G.Elumalai and G.B.Bhaskar, “An Intelligent Transport System methodology to identify and controlling of Faulty Vehicles”, International Conference on Frontiers of Mechanical Engineering, Materials and Energy, December 20-21, 2012, Beijing, China.

9. K.Pazhanivel, K.Poyyathappan, P.Anandan, N.Ramadoss and G.B.Bhaskar “Flexural analysis on GFRP composites subjected to cyclic gradual load and cyclic impact”, The 3rd International Conference on Advanced Materials Research,  January 19-20, 2013, Dubai, UAE.

10. P.Arunagiri, A.Gnanavel Babu and G.B.Bhaskar “Redesign of Manufacturing Process Flow for UPCR Pump Housing in Automobile Industry to Improve Productivity through Lean Production Systems” International Conference on Engineering Materials and Processes, May 23-24, 2013, Page: 464-468, India.

11. S.Rajesh, and G.B.Bhaskar “Assessment of the Performance of Laminated Composite Leaf springs Subjected to Cyclic Loading” International Conference on Engineering Materials and Processes, May 23-24, 2013, Page: 536-540, India.

12. N.Venkatesan, G.B.Bhaskar, K.Poyyathappan, and A.Gnanavel Babu “Effect of Nanoclay (MMT) on Mechanical Properties of High Density Polyethylene Nanocomposites” International Conference on Engineering Materials and Processes, May 23-24, 2013,    Page: 568-571, India.

13. N.Vasudevan and G.B.Bhaskar “Experimental investigation and optimization on machining of cryogenically treated Al-SiC Composites” International Conference on Engineering Materials and Processes, May 23-24, 2013, Page: 577-583, India.

14. K. Pazhanivel, G.B.Bhaskar, N.Ramadoss, A.Elayaperumal and P.Anandan “Influence of SMA Short Fibers on Mechanical Properties of Copper Wire Embedded GFRP Composites” International Conference on Engineering Materials and Processes, May 23-24, 2013, Page: 546-549, India.

15. P.Shanmugavel, G.B.Bhaskar, and M.Chandrasekaran “Determination of Stress Intensity Factors and Fatigue Characteristics for Al-TiO2 Composite Material Experimentally and Al- TiO2 Functionally Graded Material by Simulation” International Conference on Engineering Materials and Processes, May 23-24, 2013, Page: 485-493, India.

16. V.Velmurugan, G.B.Bhaskar, and D.M.Santhoshsarang “Mechanical Characterization and Analysis of Natural Fibre Reinforced Hybrid Composites” International Conference on Engineering Materials and Processes, May 23-24, 2013, Page: 656-660, India.

17. K.Palani, C.Elanchezian and G.B.Bhaskar, “Optimization of Process Parameters on AA8011 Friction Stir Welded Aluminum Alloys Using Taguchi Based Grey Relational Analysis” Proceedings of the International Conference on Applied Research in Engineering (iCARE’2014), pp.215, May 21-23, 2014, Chennai, India.

18. K.G. Rajasekaran and G.B.Bhaskar, "Application of MCDM methods in supplier selection" International conference on computational Intelligence and Advanced Manufacturing Research (ICCIAMR2014), Vels University, Chennai, May 2-3, 2014. 

19. R. Gowtham, G. Bhavesh, T. N. Abubakkar Sithik, G.B. Bhaskar, K. Gangatharan, " Tribological behavior of Copper hybrid Multi Walled Carbon Nano Tube – Boron Carbide Composites" Proceedings of the International Conference on Advance Research and Innovation in Engineering Science, Technology and Management, pp.102 held at ARS College of Engineering, Chennai, India during 4th & 5th April 2015.

20. R. Jai Karthik, M. Kishore Kumar, G. Somasundaram, G. Venkatakrishnan, G. B. Bhaskar, "Comparative analysis and experimental investigation of aluminum and banana fibers reinforced GFRP hybrid composites for automotive applications" Proceedings of the International Conference on Advance Research and Innovation in Engineering Science, Technology and Management, pp.102 held at ARS College of Engineering, Chennai, India during 4th & 5th April 2015.

21. S.Rajesh, G.B.Bhaskar, V.Gnanamoorthi, K.Pazhanivel and S.Suresh "Assessment of Performance on Composite Leaf Springs subjected to Low Velocity impact loading” International Conference on Advances in Mechanical Engineering “ICAME 2015”, 15t& 16th  October 2015, University College of Engineering, Villupuram, ISBN 978-93-85477-29-4, Page: 627-630.

22. D.Rambabu, G.B.Bhaskar A.Lenin and K.Pazhanivel “Optimization of Product design and development with Product Life Cycle Management incorporated with  Advanced Product Quality Planning process” International Workshop on Advanced Functional Nanomaterials (TIWAN-2015), 16th to 18th December 2015, Centre for Nano Science and Technology, Anna University, Chennai, Chennai, Page.77.

23. N.Venkatesan, G.B.Bhaskar and K.Pazhanivel "Influence of organo-modified cloisite 30b nanoclay on mechanical properties of HDPE nano composites" International Workshop on Advanced Functional Nanomaterials (TIWAN-2015), 16th to 18th December 2015, Centre for Nano Science and Technology, Anna University, Chennai, Chennai, Page.75.

24. S.Rajesh, G.B.Bhaskar and  K.Pazhanivel “Investigation of  Laminated Composite Leaf Springs subjected to Low Velocity Impact Loading”, International Workshop on Advanced Functional Nanomaterials (TIWAN-2015), 16th to 18th December 2015, Centre for Nano Science and Technology, Anna University, Chennai, Page. 81.

25. D. Rambabu, G.B.Bhaskar, A.Lenin, K.Pazhanivel "Radically reducing the lead time of product design and development with Product Life Cycle Management integrated with Advanced Product Quality Planning process”, International Conference on Advances in Mechanical Engineering “ICAME 2015”, 15th  & 16th  October 2015, University College of Engineering ,Villupuram, ISBN 978-93-85477-29-4, Page: 875-882.

26. K. Pazhanivel, G.B. Bhaskar, P. Anandan, A. Elayaperumal and S. Arunachalam “Fabrication and flexural properties of GFRP composites embedded with Ni-Ti SMA reinforcements”, International Workshop on Advanced Functional Nanomaterials (TIWAN-2015), 16th to 18th December 2015, Centre for Nano Science and Technology, Anna University, Chennai, Page.60.

27. B. Rudhrakotteswaran and  G.B.Bhaskar, "Production of biodiesel from used vegetable oil by chemical transesterification process",  Proceedings of International Conference on Mechanical, Materials and Manufacturing Systems  (ICMMMS’16), India, Page. 32.

28. A.Thirumurugan, G.B.Bhaskar, K.Poyyathappan, R. Jai Karthik, M. Kishore Kumar, G. Somasundaram, G. Venkatakrishnan, "Investigations on Aluminium wire mesh, Banana fiber and Glass fiber reinforced hybrid composites" Proceedings of International Conference on Mechanical, Materials and Manufacturing Systems  (ICMMMS’16), India, Page. 37.

29. Franklin Issac R, Rajesh S, Bhaskar G B, "Evaluation of composite leaf spring subjected to low velocity impact loading and cyclic loading",  International Conference on Materials Science & Technology (ICMTech -2016), organised by International Association of Advanced Materials (IAAM), University of Delhi and VBRI Press during 01 - 04 March, 2016 at the Conference Centre, University of Delhi, India. DOI: 10.5185/icmtech.2016.

30. Palani K, Elanchezhian C, Bhaskar G.B, Pranavadithya A.S.V.G.J, Chaitanya Govind C, " Effect of friction stir welding process parameters on microstructural behavior on nugget zone in AA8011 aluminium alloys"  Proceedings of International Conference on Mechanical, Materials and Manufacturing Systems  (ICMMMS’16), India, Page. 57.

31. Palani K, Elanchezhian C, Bhaskar G.B ,Vijaya Ramnath B, Sai Jagadeesh J,  Manoj Kumar G, " Multi response optimization of process parameters on mechanical properties of friction stir welded aluminium alloys using taguchi-grey method" Proceedings of International Conference on Mechanical, Materials and Manufacturing Systems  (ICMMMS’16), India, Page. 62

32. K. Venkatesan and G.B. Bhaskar “Evaluation of Mechanical Properties of Sisal Fiber Reinforced Epoxy Composites" Proceedings of the international Conference on Recent Innovations in Production Engineering (RIPE-2017), MIT, Anna University, Chennai, India, 24th - 25th March 2017, ISBN: 978-93-86256-65-2, PP.97-98

33. Manikandan A., Raja Narayanan S. and Bhaskar G.B. "Optimization of Abrasive Water Jet Machining Process on Glass Laminate Aluminium  Reinforced Epoxy" Proceedings of the international Conference on Recent Innovations in Production Engineering (RIPE-2017), MIT, Anna University, Chennai, India, 24th - 25th March 2017, ISBN: 978-93-86256-65-2, PP.23-24

34. N. Venkatesan, G.B. Bhaskar, A.C. Rabindra and K. Pazhanivel, "Analysis of Mechanical Properties of HDPE Reinforced with Rice Husk Ash and  Nanoclay Composites" Proceedings of the international Conference on Recent Innovations in Production Engineering (RIPE-2017), MIT, Anna University, Chennai, India, 24th - 25th March 2017, ISBN: 978-93-86256-65-2, PP.95-96

35. V. Aravindan, N. Ramadoss, K. Pazhanivel and G.B. Bhaskar, "Analytical Investigation and Improving the Material Characteristics on Polypropelene Adding with High Density Polyethelene" Proceedings of the international Conference on Recent Innovations in Production Engineering (RIPE-2017), MIT, Anna University, Chennai, India, 24th - 25th March 2017, ISBN: 978-93-86256-65-2, PP.149-150

36. V. Porselvan, N. Ramadoss, K. Pazhanivel and G.B. Bhaskar, "Performance Analysis and Comparison of Inclined Type Solar Still by using Nano Materials and  Wick Absorber Proceedings of the international Conference on Recent Innovations in Production Engineering (RIPE-2017), MIT, Anna University, Chennai, India, 24th - 25th March 2017, ISBN: 978-93-86256-65-2, PP.159-160

37. U.Vishnuja, G.B. Bhaskar and Manu Ravuri, "A Numerical Study of Stress and Temperature on Turning Process by using DEFORM-3D" Proceedings of the international Conference on Recent Innovations in Production Engineering (RIPE-2017), MIT, Anna University, Chennai, India, 24th - 25th March 2017, ISBN: 978-93-86256-65-2, PP.119-120

38. N. Vasudevan and G.B.Bhaskar, " Microstructure and Mechanical Properties of AA5083/SiC Fabricated by Stir Casting" Proceedings of the international Conference on Recent Innovations in Production Engineering (RIPE-2017), MIT, Anna University, Chennai, India, 24th - 25th March 2017, ISBN: 978-93-86256-65-2, PP.55-56

39. P.Santhanamoorthy, G. B. Bhaskar and R.V.Manoj Kumar, "Comparative study of mechanical properties of glass carbon hybrid Composites with fine blanking using analysis software and Experimental method" Proceedings of the International Conference on Advances in Materials, Manufacturing and Applied Science (ICAMMAS'17),  March 30-31, 2017 Chennai, India Paper ID: ICAMMAS-112.

40. K.Poyyathappan, G. B. Bhaskar, S.Rajesh and K. Pazhanivel, " Experimental Analysis and Comparative Mechanical testing on Glass-Carbon Hybrid Composites"   Proceedings of the International Conference on Advances in Materials, Manufacturing and Applied Science (ICAMMAS'17),  March 30-31, 2017 Chennai, India Paper ID: ICAMMAS-104.

41. Saravanan G, G. B. Bhaskar, Kaviyarasan.E, Naveen B, Prabakaran and Rajesh S, "Experimental Investigation of Mechanical Behavior of Bauhinia Racemosa-Based Glass Fiber Reinforced Composites" Proceedings of the International Conference on Advances in Materials, Manufacturing and Applied Science (ICAMMAS'17),  March 30-31, 2017 Chennai, India Paper ID: ICAMMAS-115.

42. B.Janarthanan, C.Elanchezhian, Dr.G.B.Bhaskar, N.Ramkumar and B.Vijaya Ramnath, "Relationship between Fracture Toughness and Specimen Thickness for Quasi-isotropic Titanium/Epoxy Laminates" Proceedings of the International Conference on Advances in Materials, Manufacturing and Applied Science (ICAMMAS'17),  March 30-31, 2017 Chennai, India Paper ID: ICAMMAS-142.

43. C.Elanchezhian,B.Vijaya ramanth, G.B.Bhaskar and M.Vivekanandhan, "An Investigation of the Mechanical Properties of Hybrid Composites in Applications of Automotive Industry" Proceedings of the International Conference on Advances in Materials, Manufacturing and Applied Science (ICAMMAS'17),  March 30-31, 2017 Chennai, India Paper ID:ICAMMAS-143.

 44. Vasudevan N , Bhaskar G.B , Rajendra Prasad A and Suresh S.M, "Corrosion study on AA5083 aluminum alloy-boron carbide composites" Proceedings of the International Conference on Advances in Materials, Manufacturing and Applied Science (ICAMMAS'17),  March 30-31, 2017 Chennai, India Paper ID: ICAMMAS17-160

 

National Conferences

1. G.B.Bhaskar, D.Rambabu, V.Peeradeep Vignesh and I.Venkatesan (2011). An approach to dynamic process based cost in modeling round duct elbow forming process, National Conference on “Technological Advances in Manufacturing, Modeling and Analysis” TAMMA’2011, 08th April 2011 held at St. Joseph’s College of Engineering, Chennai, India.

2. G.B.Bhaskar and S.Vigneshwaran (2011). Modelling and analysis of magneto rheological dampers, National Conference on “Recent Advancements in Mechanical Engineering” RAME’2011, 30th March 2011 held at Rajalakshmi Engineering College, Chennai, India.

3. G. Ashok Kumar, R.Naveen Kumar, S.Vignesh, K.Poyyathappan and G.B. Bhaskar (2012). Low Cyclic Impact Fatigue study properties of Glass Fiber Reinforced Plastics (GFRP) composites, National conference on “Research Trends in Mechanical Engineering” (NCRTME’2012), 11th April 2012 held at Vels University, Chennai, India.

4. N.Venkatesan, Babu, Jaheer hussain, Ashok raj, G.B.Bhaskar and A.Ganavel babu. “Important Mechanical Properties of HDPE/MMT nano composites”, National Conference on Fascinating Advancements in Mechanical Engineering (FAME - 2013) in R.M.K College of Engineering and Technology Chennai, 11THMARCH 2013, pp.185-188.

5. D.Rambabu, U.Senthilrajan, K.P.Vasanthan, G.B.Bhaskar and A.Gnanavel babu. “Modelling of heavy vehicle brake drum through static and thermal analysis using CAE”, National Conference on Fascinating Advancements in Mechanical Engineering (FAME - 2013) held at R.M.K College of Engineering and Technology Chennai, 11THMARCH 2013, pp.154-158.

6. S.Rajesh, R. Amrith kumar, L.M Berlin raj, C. Herbert bebiyan and G.B.Bhaskar. “Laminated Composites as the Material for the Replacement of Conventional Leaf Spring Materials in Automobiles”, National Conference on Fascinating Advancements in Mechanical Engineering (FAME - 2013) held at R.M.K College of Engineering and Technology Chennai, 11TH MARCH  2013, pp.181-184.

7. K.G. Rajasekaran and G.B.Bhaskar. ‘An Overview of multi criteria decision making methods’. National conference on Modeling, Simulation and Optimization (NCMSO 2013), Vels University, Chennai, Nov 9, 2013, pp.236-242, ISBN:978-81-909042-5-4.

8. Ganesh.K and Bhaskar.G.B, "Areview on biodiesel as an alternative fuel for IC Engines"  National conference on Modeling, Simulation and Optimization (NCMSO 2013), Vels University, Chennai, Nov 9, 2013, pp.205-210, ISBN:978-81-909042-5-4.

9. S.Rajesh, G.B.Bhaskar, J.Venkatachalam and K. Pazhanivel “Comparative study on composite leaf spring used in light commercial vehicles”, National Conference on Recent Advances in Materials Science & Nanotechnology (RAMN-2017) held at AMET University, Chennai during 26th & 27th May 2017, page. 20

10. K.Poyyathappan, G.B.Bhaskar, S.Rajesh and K. Pazhanivel “Joint strength analysis of lap joint in polymer   composites”, National Conference on Recent Advances in Materials Science & Nanotechnology (RAMN-2017) held at AMET University, Chennai during 26th & 27th May 2017, page. 21

11. C.Palkumar, G.B.Bhaskar and D.Rambabu, “study on energy consumption pattern on old elevators with safety measure”, National Conference on Recent Advances in Materials Science & Nanotechnology (RAMN-2017) held at AMET University, Chennai during 26th & 27th May 2017, page. 41

 

12. N.Venkatesan, G.B.Bhaskar, S.Rajesh and K. Pazhanivel, “study on tensile and impact properties of sisal and glass fiber composites”, National Conference on Recent Advances in Materials Science & Nanotechnology (RAMN-2017) held at AMET University, Chennai during 26th & 27th May 2017, page. 22

 

 

Organised

• As Coordinator, Organized TNSCST sponsored two day workshop on “Recent Trends in Manufacturing Processes (RTMP-2012)” held at Department of Mechanical Engineering, Tagore Engineering College, Chennai during 7^th & 8^th August 2012.
• As Convenor, Organized an International Conference on Engineering Materials and Processes (ICEMAP-2013) held at Hotel Radha Regent, Chennai during 23^rd and 24^th May 2013.
• As Co-Coordinator, Organized UGC Sponsored two day workshop on “Green Manufacturing Concepts (GMC-2015)” held at Department of Production Technology, MIT Campus Anna University, Chennai during 16^th & 17^th February 2015.

 

Participated

• Participated in the AICTE –ISTE short term course on “ recent advances in metal shaping techniques “ at PSG college of Technology, Coimbatore during   Nov. 15 to 28-1999 

• Participated in the national workshop on  “Taguchi method based quality engineering techniques” at Arunai Engineering College, Thiruvannamalai during Feb. 18 to 20-2001 

• Participated in the AICTE workshop on “Staff Development Programme” at Anna University, chennai during 27th Jan. to14th Feb. 2003

• Participated in the conference on “ Advances in Materials “ at IIT Madras held on 2nd April’ 2004 

• Participated in the seminar on “Recent Trends in Product Design” at Sri Muthukumaran Institute of Technology, Chennai held on 28th Sep’2006.

• Participated in the course on “Computer Integrated Manufacturing” at Sri Muthukumaran Institute of Technology, Chennai during 11th June to 23rd June 2007.

• Participated in the AICTE sponsored Faculty Development Programme on “Applied Hydraulics and Pneumatics” at Anna University, Chennai during 12th  to 20th June 2008.

• Participated in the Faculty Development Programme on “MATLAB Programming and applications” at Rajalakshmi Engineering College, Chennai during 29th to 31st Dec 2008.

• Participated in the AICTE sponsored workshop on “Kaizen–The Stepping stone for Innovations and Inventions” at Rajalakshmi Engineering College, Chennai during Mar. 20th to 21st 2009.

• Participated in the International seminar on “Composites for Aerospace Applications” at Hindustan University, Chennai held during Mar. 24 to 26-2009.

• Participated in the AICTE sponsored National Conference on “Optimization Techniques and its application in Engineering” held at Rajalakshmi Engineering College, Chennai on 6th & 7th August 2009.

• Participated in the AICTE sponsored Faculty Development Programme on “Genetic algorithm and other optimization techniques” held at Rajalakshmi Engineering College, Chennai during 19th August to 1st September 2009.

• Participated in the AICTE sponsored Staff Development Programme on “Recent Developments in Manufacturing and Management” held at Sri SaiRam Engineering College, Chennai during 25th to 30th July 2011.

• Participated in the AICTE sponsored Staff Development Programme on “Processing and Applications of Advanced Composite Materials” held at St. Joseph’s College of Engineering, Chennai during 7th to 19th November 2011.

• Participated in the National seminar on “Alternate Fuels” at Vels University, Chennai held on 25th February 2012.

• Participated in the DST-PURSE sponsored workshop on “Recent Research Trends in Advanced Engineering Materials and Composites and its Characterisation” at College of Engineering, Anna University, and Chennai during 27th & 28th March 2012.

• Participated and presented a paper in the National Conference on “Research Trends in Mechanical Engineering” at Vels University, Chennai held on 11th April 2012.

• Acted as Session Chair in the 2nd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE’2012) at Singapore during April 28-29, 2012.

• Participated in the Two Day National seminar cum workshop on “Alternate Fuels and Automotive Electronics” at Karpaga Vinayaga College of Engineering and Technology, Maduraanthagam held during 7th & 8th September 2012.

• Acted as Session Chair in the 2nd International Conference on Futuristic Trends in Mechanical Engineering (ICFTME-2013), held at Thiruvalluvar College of Engineering and Technology, Vandavasi during 2nd & 3rd March 2013.

• Participated in the National Conference on “Fascinating Advancements in Mechanical Engineering” (FAME 2013) held at RMK College of Engineering and Technology, Puduvoyal, on 11th March 2013.

• Participated in the “International Workshop on Research Methodlogy” held at Karpaga Vinayaga College of Engineering and Technology, Maduraanthagam on 3rd April 2013.

• Acted as Session Chair in the “International Conference on Computational Intelligence and Advanced Manufacturing Research” (ICCIAMR 2013), held at Vels University, Chennai during 5th & 6th April 2013.

• Participated in the KAYAKALPA COURSE at The World Community Service Centre, Chennai – 41 on 7th April 2013.

• Attended a two day course on “Metallurgy and Materials for Practicing Engineers & Researchers” held at IIT Madras during 21st and 22nd September 2013.

• Participated and acted as Resource Person in the AICTE sponsored Faculty Development Programme on “Advancements in Materials, Manufacturing Processes and Management Systems” at Sri Sairam Engineering College, Chennai during 4th November to 16th November 2013.

• Participated in the one day workshop on “Raise the Bar Workshop 2K14” held at Department of Automobile Engineering, Hindustan University Chennai on 1st February 2014

• Participated in the two days workshop on “Recent Trends on Nanomaterials for Engineering Applications (ETNEA 2014)” held at MIT, Anna University Chennai during 21st and 22nd February 2014.

• Participated as Session Chair in the 3rd International Conference on Futuristic Trends in Mechanical Engineering (ICFTME-2014), held at Thiruvalluvar College of Engineering and Technology, Vandavasi during 1st & 2nd  March 2014.

• Acted as Session Chair in the “International Conference on Computational Intelligence and Advanced Manufacturing Research” (ICCIAMR 2014), held at Vels University, Chennai during 2nd  & 3rd  May 2014.

• Acted as Session Chair in the “International Conference on Futuristic Trends in Mechanical Engineering" organized by Thiruvalluvar College of Engineering and Technology, Vandavasi during 7th and 8th March 2015.

• Participated in the "National seminar on Diaster Management” held at Thiruvalluvar College of Engineering and Technology, Vandavasi on 11th April 2015.

• Participated in the one day workshop on “Computational Fluid Dynamics” held at Thiruvalluvar College of Engineering and Technology, Vandavasi on 19th April 2015.

• Organized a two day workshop on "Emerging Trends in Mechatronic Systems (ETMS-2015) held during 6th and 7th March 2015 at the Department of Production Technology, MIT Campus, Anna University, Chennai.

• Participated in the AICTE Sponsored summer school Programme on “Computer Aided Product Design” organized by the Department of Mechanical Engineering, SSN College of Engineering, Chennai during 15th to 27th  June 2015.

• Attended CII-DSIR Conference on Advanced Manufacturing Technologies for Engineering Sector on 26th June 2015 at Hotel ITC Grand Chola, Chennai.

• Acted as Session Chair in the “International Conference on Advances in Mechanical Engineering” (ICAME-2015), held at University College of Engineering, Villupuram during 15th  & 16th  October 2015.

• Participated in "Third International workshop on Advanced Functional Materials (TIWAN - 2015) held at the Centre for Nano Science and Technology, Anna University Chennai during 16th to 18th December 2015.

• Participated in the Faculty Development Training Programme on “Production Planning and Control” at College of Engineering, Anna University, Chennai during 27th  Nov to 3rd Dec 2015.

• Acted as Session Chair in the “International Conference on Materials, Design and Manufacturing Process (ICMDM 2016)”, held at the Department of Mechanical Engineering, College of Engineering, Anna University Chennai during 17th  & 19th  February 2016.

• Participated in the "One day workshop on Recent Trends in AWJM" held at the Department of Production Technology, MIT Campus, Anna University Chennai on 19th February 2016.

• Participated as Panel Discussion Member & Session Chair in the “International Conference on "Mechanical, Materials and Manufacturing Systems (ICMMMS'16) held at Sri Sairam Engineering College, Chennai during 24th and 25th February 2016.

• Acted as Session Co-Chair in the "National Conference on Automation, Robotics and Mechatronic Systems (NCARMS-2016)" held at Department of Production Technology, MIT Campus, Anna University Chennai during 25th and  to 26th March 2016.

• Participated in the one week Faculty Development Training Programme on “ME6504 - Metrology and Measurements” at Department of Production Technology, MIT Campus, Anna University Chennai during 30th May to 5th June 2016.

• Participated in the Faculty Development Training Programme on “Design of Machine Elements” at Saveetha Engineering College, Chennai during 13th  to 20th June 2016.

• Participated in the ICFAI Business School (IBS) organized Faculty Knowledge Programme on 5th August 2016 at Chennai.

• Acted as Session Chair in the sixth National Level Technical Symposium PROKRAFT 2k16 held at Sri Sairam Engineering College, Chennai on 24th August 2016.

• Participated in the "One day workshop on Surface and Form Measurements in Automobile Engineering" held at the Department of Mechanical Engineering, College of Engineering, Guindy Campus, Anna University Chennai on 12th January 2017.

• Participated in the one week Short Term Course on “Green Techniques for Sustainable Construction” held at Department of Civil Engineering, National Technical Teachers Training and Research, Chandigarh during 6th to10th February 2017.

 

• Participated in the Faculty Development Training Programme on “ME 6503 – Design of Machine Elements” at University College of Engineering, Panruti, held during 17.05.2017 to 23.05.2017, sponsored by Center for Faculty Development , Anna University Chennai. 

 

 

 

 

Year	Project Title	Grant Received	Outcome/Status
2011	Experimental studies on the characteristics of evaporative heat transfer and pressure drop of CO2 mixed with various refrigerants” was completed	Rs. 1.6 Lakhs	completed
2013	Optimization of fine blanking process for glass-carbon hybrid composites	Rs. 14.9 lakhs	On going
	Life saving jacket for workers working at high altitude jobs	Rs. 25,000/-	completed
	Formability studies on incremental forming of polymers with increasing wall angle	Rs. 25,000/-	completed

 

Sl. No	Name of the candidate	Register No.	Thesis Title / Broad Area Research Work	Date
				Registration	Viva voce
1	Mr. P.Shanmugavel	2006219706	Experimental investigations on fatigue characteristics of Aluminium Ceramic Composite Materials	30.07.2006	13.03.2015
2	Mr.K.Pazhanivel	2011112005	Study on Response Characteristics of Reinforced Polymeric Composites to Different Working Environments	31.01.2011	19.08.2015
3	Mr.G.Elumalai	2010194101	Identification and Controlling of a vehicle using Intelligent Transport System	23.01.2010	13.04.2016
4	Mr. N.Venkatesan	2011112006	STUDY ON CHARACTERISATION AND PHYSICAL PROPERTIES OF POLYMER NANO COMPOSITES	30.01.2011	11.01.2018
5	Mr.S.Rajesh	2011112035	Experimental Analysis and Investigations on Composite Leaf Spring	31.01.2011	23.03.2018

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S. No	Name of the candidate	Register No.	Title / Broad Area Research Work	Date
				Registration	Viva voce
1	Mr.D.Rambabu	2011112001	An Impact Study in New Product Development process through SAP PLM Methodology	31.01.2011
2	Mr.P.Santhanamoorthy	2011112002	Fine Blanking Process for Glass-Carbon Hybrid Composites	31.01.2011
3	Mr.K.Poyyothappan	2011172028	Drilling Characterization of Hybrid (Carbon – Glass Fibre Reinforced Plastic) Composites	19.07.2011
4	Mr.C.Muthazhagan	2011172022	Effect of Boron carbide and graphite on Tribological characteristics of Al 6061 composites.	19.07.2011
5	Mr.N.Vasudevan	2011172047	Investigations on friction stir welding of 5083 Aluminium alloy silicon carbide/Boron carbide composites	19.07.2011
6	Mr.K.Venkatesan	1413299803	Mechanical and Water Absorption Properties of LUFFA Cylindrica-Sisal-Nylon Fiber Reinforced HDPE Composite	16.06.2014
7	Mr.A. Manikandan	1514239839	Investigations on Fiber Metal Laminates	15.07.2015
8	Mr.G. Saravanan	1513239276	Experimental analysis of FML for Aircraft Structures	02.01.2015
9	Mrs.U.Vishnuja	17252391330	INVESTIGATION ON MACHINING CHARACTERSTICS OF AISI 1045 STEEL WITH VARIOUS TOOLS	January 2017
10	Mr.P.Thilagaraj	17142397398	Experimental study on the incremental forming of coated aluminium alloy sheets	June 2017
11	Mr.S.Malligarjunan	1114299122	Optimum part deposition orientation in layered Manufacturing	08.01.2011

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sl. No.	Title	Date
1	AICTE –ISTE short term course on “ recent advances in metal shaping techniques”	Nov 15 to 28-1999
2	national workshop on  “Taguchi method based quality engineering techniques”	Feb. 18 to 20-2001
3	AICTE workshop on “Staff Development Programme”	27th Jan. to14th Feb. 2003
4	conference on “ Advances in Materials “	2nd April 2004
5	seminar on “Recent Trends in Product Design”	28th Sep’2006
6	course on “Computer Integrated Manufacturing”	June 11th to 23rd 2007
7	AICTE sponsored Faculty Development Programme on “Applied Hydraulics and Pneumatics”	12th  to 20th June 2008
8	Faculty Development Programme on “MATLAB Programming and applications”	29th to 31st Dec 2008
9	AICTE sponsored workshop on “Kaizen–The Stepping stone for Innovations and Inventions”	Mar. 20th to 21st 2009
10	International seminar on “Composites for Aerospace Applications”	Mar. 24 to 26-2009
11	AICTE sponsored National Conference on “Optimization Techniques and its application in Engineering”	6th & 7th August 2009
12	AICTE sponsored Faculty Development Programme on “Genetic algorithm and other optimization techniques”	19th August to 1st September 200
13	AICTE sponsored Staff Development Programme on “Recent Developments in Manufacturing and Management”	25th to 30th July 2011
14	AICTE sponsored Staff Development Programme on “Processing and Applications of Advanced Composite Materials”	7th to 19th November 2011
15	National seminar on “Alternate Fuels”	25th February 2012
16	DST-PURSE sponsored workshop on “Recent Research Trends in Advanced Engineering Materials and Composites and its Characterisation”	27th & 28th March 2012
17	National Conference on “Research Trends in Mechanical Engineering”	11th April 2012
18	Session Chair in the 2nd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE’2012) at Singapore	April 28-29, 2012
19	Two Day National seminar cum workshop on “Alternate Fuels and Automotive Electronics”	7th & 8th September 2012
20	Acted as Session Chair in the 2nd International Conference on Futuristic Trends in Mechanical Engineering (ICFTME-2013)	2nd & 3rd March 2013
21	National Conference on “Fascinating Advancements in Mechanical Engineering” (FAME 2013)	11th March 2013
22	“International Workshop on Research Methodlogy”	3rd April 2013
23	Acted as Session Chair in the “International Conference on Computational Intelligence and Advanced Manufacturing Research” (ICCIAMR 2013)	5th & 6th April 2013
24	KAYAKALPA COURSE at The World Community Service Centre, Chennai	7th April 2013
25	two day course on “Metallurgy and Materials for Practicing Engineers & Researchers”	21st and 22nd September 2013
26	Resource Person in the AICTE sponsored Faculty Development Programme on “Advancements in Materials, Manufacturing Processes and Management Systems”	16th November 2013
27	one day workshop on “Raise the Bar Workshop 2K14”	1st feb 2014
28	two days workshop on “Recent Trends on Nanomaterials for Engineering Applications (ETNEA 2014)”	21st and 22nd February 2014
29	Session Chair in the 3rd International Conference on Futuristic Trends in Mechanical Engineering (ICFTME-2014)	1st & 2nd  March 2014
30	Acted as Session Chair in the “International Conference on Computational Intelligence and Advanced Manufacturing Research” (ICCIAMR 2014)	2nd  & 3rd  May 2014
31	Organized a two day workshop on "Emerging Trends in Mechatronic Systems (ETMS-2015)	6th and 7th March 2015
32	Acted as Session Chair in the “International Conference on Advances in Mechanical Engineering” (ICAME-2015)	15th  & 16th  October 2015
33	"Third International workshop on Advanced Functional Materials (TIWAN - 2015)	16th to 18th December 2015
34	Faculty Development Training Programme on “Production Planning and Control”	27th  Nov to 3rd Dec 2015
35	Session Chair in the “International Conference on Materials, Design and Manufacturing Process (ICMDM 2016)”	17th  & 19th  February 2016
36	"One day workshop on Recent Trends in AWJM"	February 2016
37	Panel Discussion Member & Session Chair in the “International Conference on "Mechanical, Materials and Manufacturing Systems (ICMMMS'16)	24th and 25th February 2016
38	Faculty Development Training Programme on “Metrology and Measurements”	30 May to 5 June 2016