NAME                                  : P. Sudha

         DESIGNATION                      :Teaching Fellow

         QUALIFICATION                   :M.Tech

         AREAS OF SPECIFICATION     :   PLASTICS MATERIALS

         EMAIL ID                             : This email address is being protected from spambots. You need JavaScript enabled to view it.

• Education Qualification

   

  Degree	Branch/Specialization	Institute/University	Year of Passing
  M.Tech	Plastics Technology	Central Institute of Plastics Engineering and Technology (CIPET)Anna University	2015
  M.B.A.	Human Resource Management	Madras University	2010
  B.Tech	Rubber Technology	MIT, Anna University	2001

   

 Name                                : Dr.K.ELANGOVAN

 Designation                        : ASSISTANT PROFESSOR

 Educational qualification      : M.Tech., Ph.D.

 Phone no                           : 044-22516058

 Key Research Areas          : Rapid tooling, Alternate material development for

                                             rapid tool,Polymer Matrix Composites

 Email id                             : This email address is being protected from spambots. You need JavaScript enabled to view it.

• Educational Qualification

   

  Degree	Branch/Specialization	Institute/University	Year of Passing
  Ph.D.	Technology	MIT, Anna University	2012
  M.Tech	Polymer Science Engineering	Anna University	2001
  B.E.	Production Engineering	University of Madras	1999

   

   

• Publications

   

  1. Kasi Elangovan, Francis Xavier, Arun Kumar Murugesan and Balu Pandian," Effect of Crosslink Density on Cut and Chip Resistance of 100% SBR Based Tire Tread Compound",Materiale Plastice, 2021, Vol.58, No.1, pp.34-46, ISSN: 2668-8220.

  2. K.Elangovan, A. Mathivanan, K.Chnadrasekar, Mohammed Rizwan, R. Ramadoss AND P.Balu," Thermal Aging and Degradation of Acrylonitrile Butadiene Rubber and Polyacrylate Rubber", Solid State Technology, 2021, Vol.64, No.2,pp.938-946, ISSN: 0038-111X

  3. K.Elangovan and P.Velavan., " Fatigue and Simulation Studies in Reinforced-Polyurethane based sheet metal Forming Dies", International Journal of advance Research in Science and Engineering, 2018, Vol.7, No.2, pp- 714-724. Impact factor: 1.142 ISSN: 2319-8354

  4. H. Sheik Mohammed, K. Elangovan, V. Subrahmanian., "Studies on Aramid Short Fibers Reinforced Acrylonitrile Butadiene Rubber Composites", Indian Journal of Advances in Chemical Science., 2016, Vol.4, No. 4, pp. 458-463. ISSN: 2320-0898

  5. K. Sridharan and K. Elangovan, "Investigation on the swelling characteristics of NR/BR rubber blends", Journal of Chemical and Pharmaceutical Research, 2016, Vol. 8, No.1, pp. 553-557. Impact factor:0.39: ISSN: 09757384

  6. K. Sridharan, K. Elangovan and R. Sivaramakrishnan., "Deformation Analysis of Rubber Cylinders", International Journal of Advances in Engineering and Emerging Technology (IJAEET), 2013, Vol. 4, No. 1, , pp. 1-12. Impact factor:0.784: ISSN: 2321-452X

  7. K.Sridharan and K.Elangovan, "Deformation analysis of Rubber blocks under large compressive strain", Journal of Chemical and Pharmaceutical Sciences, 2015, Special Issue 9, pp. 130-136. Impact factor 1.421 0976-9390

  8. N. Senthilkumar, K. Kalaichelvan and K. Elangovan., "Mechanical behavior of aluminum particulate epoxy composite – Experimental study and numerical simulation" , International Journal of Mechanical and Materials Engineering (IJMME), 2012, Vol. 7, No. 3, pp. 214-221.

  9. K. Elangovan, K. K. Iynesh kumar and B. Kothandaraman., "Effect of glass microspheres and
  aluminium filler in the properties of epoxy and modified epoxy matrix composite for rapid tooling applications", International Journal of Plastics Technology, 2009, Vol. 13, No. 1, pp. 38–46.

    

• Conference

    

  05. K.Elangovan, B.Kothandaraman, "Feasibility evaluation of Epoxy based composites for rapid tooling applications" presented in a National level conference on Future Trends and Advances in Mechanical Engg., organised by Bharath university, Chennai, India from 30-Jul-2004 to 30-Jul-2004.

  04. "Epoxy based composites" presented in a International level conference on Advances in Polymer Technology (APT 2008), organised by Cochin university of science and technology & Indian Rubber Institute, Kerala, India from 25-Sep-2008 to 27-Sep-2008.

  03. "Epoxy based particulate composites for possible applications in tooling" presented in a International level conference on ANTEC MUMBAI, organised by ANTEC MUMBAI, India from 06-Dec-2012 to 08-Dec-2012.

  02. "Machinability studies of aluminium filled and silicone modified epoxy matrix composites." presented in a International level conference on Advances in Materials Processing and Characterisation (AMPC 2013), organised by Dept. of Mechanical Engg. Anna University, Chennai.25, India from 06-Feb-2013 to 08-Feb-2013.

  01. K.Elangovan, "Machinability studies of epoxy based composites." presented in a National level conference on National conference on Automation, Robotics and Mechatronic systems, organised by Dept. of Production Tech., MIT campus, Anna University, India from 25-Mar-2016 to 26-Mar-2016. 

   

• Programme Attended

  22. Attended a National level seminar on "Rapid Prototyping Technology 2002" organized by AU FRG Institute for CAD/CAM, Anna University, India from 18-Oct-2002 to 19-Oct-2002.

  21. Attended a National level seminar on "Advances in Image Processing and Robotics (ADIPRO 2005)" organized by Dept. of Production Tech. MIT, Anna University., India. from 25-Feb-2005 to 26-Feb-2005.

  20. Participated in a National level conference on "Role of Technical Education in sustainable Development" organized by CWR,Anna university, chennai, India from 24-Mar-2005 to 26-Mar-2005.

  19. Attended a National level Short Course on "Orientation training programme on Re Engineering Teaching skills" organized by CFD, Anna university, Chennai, India from 03-May-2005 to 05-May-2005.

  18. Attended a National level Short Course on "AICTE Sponsored Induction Training programme on Instructional Design and Delivery for Engineering college Teachers " organized by NITTTR, Chennai, India from 23-Jan-2006 to 04-Feb-2006.

  17. Attended a National level Short Course on "Testing and quality control of Plastics materials and products" organized by CIPET, Chennai, India from 08-Aug-2007 to 10-Aug-2007.

  16. Attended a National level Short Course on "Updates on Design and Manufacturing of moulds." organized by CIPET, Chennai, India. from 27-Dec-2007 to 28-Dec-2007.

  15. Attended a National level Short Course on "FDTP on Engineering Mechanics" organized by Dept. of Production Technology, MIT campus, Anna University., India from 15-Dec-2008 to 20-Dec-2008.

  14. Participated in a International level workshop on "Indo-German workshop on Advanced Technologies." organized by Anna University, Chennai., India from 03-Dec-2009 to 04-Dec-2009.

  13. Participated in a National level conference on "Recent Innovations in Production Engg.(RIPE 2010)" organized by Dept. of Production Tech. MIT, Anna University., India. from 16-Apr-2010 to 17-Apr-2010.

  12. Attended a National level Short Course on "FDTP on Engineering Thermodynamics" organized by Centre for Faculty Development, Anna University., India from 20-May-2010 to 26-May-2010.

  11. Attended a National level Short Course on "FDTP on Composite Materials Technology" organized by CFD, Anna university, Chennai, India from 06-Dec-2010 to 12-Dec-2010.

  10. Attended a National level Short Course on "FDTP on Thermal Engineering I" organized by CFD, Anna University, Chennai, India from 01-Dec-2011 to 09-Dec-2011.

  09. Attended a National level Short Course on "AICTE sponsored staff Development Programme on Robotics Technology for Manufacturing" organized by Dept. of Production Technology, MIT campus, Anna University., India from 10-Dec-2011 to 23-Dec-2011.

  08. Participated in a National level workshop on "Personality Development Programme " organized by Equal opportunity Cell, CEG, Anna University, India from 09-Mar-2013.

  07. Participated in a National level workshop on "Recent Advances in Characterization of Aerospace materials through impact Testing." organized by Dept. of Aerospace Engg, MIT, Anna University., India from 22-Mar-2013 to 23-Mar-2013.
  
  06. Attended a National level Short Course on "FDTP on Introduction to Nanoscience and polymer Nano composites" organized by CFD, Anna University, Chennai, India from 01-Jul-2013 to 07-Jul-2013.

  05. Attended a National level Short Course on "UGC sponsored short term course on New materials their characterization and applications" organized by Centre for Nanoscience & Mechanical Engg, CEG, Anna University, India from 09-Oct-2014 to 10-Oct-2014.

  04. Attended a National level Short Course on "UGC sponsored short term course on New materials their characterization and applications" organized by Dept. of Aero, Mecha and crystal growth centre, Anna University, India from 15-Oct-2014 to 16-Oct-2014.

  03. Attended a National level Short Course on "FDTP on Engineering Thermodynamics" organized by CFD, Anna university, Chennai, India from 06-Jun-2016 to 12-Jun-2016.

  02. Attended a National level seminar on "Seminar on Rubber Education" organized by Indian Rubber Institute, India from 23-Jan-2017.

  01. Attended a National level Short Course on "FDTP on Fluid Mechanics and Mahinery" organized by CFD, Anna University, Chennai, India from 07-Jun-2017 to 14-Jun-2017.

• Funded Projects

  "Studies on the Rubber Laminated composite Leaf Spring", funded by CTDT, Anna University (March-2015 - September-2016). Project Cost: 100000.00.

         NAME                                  :A LAKSHMIBAI

         DESIGNATION                      :Teaching Fellow

         QUALIFICATION                   :M.Tech

         AREAS OF SPECIFICATION     :   PLASTICS MATERIALS

                                                EMAIL ID                             : 

• Education Qualification

   

  Sl.No	Degree	Institute/University	Year of passing
  1.	M.Tech Polymer science & Engineering	CEG,ANNA UNIVERSITY	2012
  2.	B.Tech Rubber and plastics technology	MIT, ANNA UNIVERSITY	2010

   

• Experience

   

  Period	Post Held	Name of the institution	Nature of Duties
  July 2015 – till now	Teaching fellow	MIT, Anna University	Teaching
  Jan 2013 – june 2015	PT lecturer	Tamilnadu polytechnic college, madurai	Teaching

• Seminars Attended

  National Conference on Nanoscience and Nanotechnology, University of Madras.  

   

  Recent trends in Polymeric Materials (RTPM-2011), CLRI, Chennai. 

• Lecture Delivered

                                                     Lecture delivered to Rane India pvt. Ltd about “Epoxies and phenolic resins”

                Lecture delivered to Indian rubber institute students about “ Manufacturing of Rubber goods”

   

Name                       : Dr. L.S.JAYAKUMARI

Designation               : Associate Professor & Head In-charge

Qualification              : M.Sc; M.Tech; Ph.D

Area of Specialization : Polymer composites, Graphene synthesis, high temperature resins, 

                                     natural fibre composites

E-mail Id                   : This email address is being protected from spambots. You need JavaScript enabled to view it.

• Educational Qualification

   

   

   

  Degree	Branch/Specialization	Institute/University	Year of Passing
  Ph.D.	High Temperature Resins	Anna University	2008
  M.Tech	Polymer Science and Engineering	CEG Campus, Anna University	1997
  M.Sc.	Applied Chemistry	CEG Campus, Anna University	1995
  B.Sc.	Chemistry	Valliammal Science College for Women, University of Madras	1993

   

   

   

• Projects/Achievements/Awards

   

  1.    An amount of Rs.7.73 lakhs has been sanctioned by UGC for the project on ” Development of Graphene-Cyanate ester Hybrid Nano Composites”.

• Publications

   

   

  25. Sahila Sambandam, Prabhu Nallamuthu, Jayakumari Lakshmanan Saraswathy (2021), “ A green approach for the development of functionalized graphene and cardanol‐based polybenzoxazine nanocomposite,” Polymer Composites, https://doi.org/10.1002/pc.26150

  24. G.Sai Krishnan, L.S.Jayakumari (2021), Extraction and Characterization of Chemical Treated and Untreated Lyciumferocissimum Fiber for Epoxy Composites”. Journal of Natural fibers https://doi.org/10.1080/15440478.2021.1921667

  23. Vivek.S , Jayakumari L S , Stephen Bernard S, Suresh G, Md. Javeed Ahmed, Arulmurugan.S (2020),“Tribological and mechanical properties of biobased reinforcement in a friction composite material,” Revista Materia, V 25, n. 3

  22. Gayathri, Dhanasekaran and Jayakumari, Lakshmanan Saraswathy,(2020). “Evaluation of commercial arrowroot starch/CMC film for buccal drug delivery of glipizide,” Polímeros, v. 29, n. 4, https://doi.org/10.1590/0104-1428.06619

  21. Sundraraman, G., Jayakumari, L.S.(2020), “Meticulous Taxifolin Releasing Performance by the Zinc Oxide Nanoparticles: As a Short Road to Drug delivery System for Cancer Therapeutics,” J Clust Sci 31, 241–255 https://doi.org/10.1007/s10876-019-01642-4

  20. Sai Krishnan G., L.S.Jayakumari., R.Vijay. and D.LeninSingaravelu. (2020), "Influence of iron–aluminum alloy on the tribological performance of non-asbestos brake friction materials – a solution for copper replacement", Industrial Lubrication and Tribology, Vol. 72 No. 1, pp. 66-78. https://doi.org/10.1108/ILT-12-2018-0441

  19. G Sai Krishnan, L S Jayakumari, L Ganesh Babu and G Suresh(2019)., “Investigation on the physical, mechanical and tribological properties of areca sheath fibers for brake pad applications,” Materials Research Express, Volume 6, Number 8http://dx.doi.org/10.1088/2053-1591/ab2615

  18. Mandip Kaur, LS Jayakumari (2019)" Consequence of cenosphere loading on hygrothermal, thermal, and mechanical properties ofepoxy syntactic foams", Journal of Cellular Plastics, published by SAGE Publications. Vol. 55,Issue 3, pp. 297-318.

  17. S Stephen Bernard, LS Jayakumari (2018), "Pressure and temperature sensitivity analysis of Palm fiber as a biobased reinforcement material in brake pad", Journal of the Brazilian Society of Mechanical Sciences and Engineering, published by Springer. Vol. 40, pp. 1 - 12 .

  16. G Suresh, LS Jayakumari, Kumar S Dinesh (2017), "Finite Element Analysis of IPN Reinforced Woven Fabric Composite", Matéria (Riode Janeiro), published by Revista Matéria. Vol. 22, Issue 4.

  15. Mandip Kaur, LS Jayakumari (2017), "Novel bio-based epoxidized cardanol/cenosphere syntactic foams: Thermal, hygrothermal andcompression characterization", High Performance Polymers, published by SAGE Publications.Vol. 29, Issue 7, pp. 785-796.

  14. Mandip Kaur, LS Jayakumari, (2016)," Eco‐friendly cardanol‐based phenalkamine cured epoxy‐cenosphere syntactic foams: Fabrication and characterisation", Journal of Applied Polymer Science, published by Wiley Inter science. Vol. 133, Issue 46.

  13. G Suresh, Lakshmanan Saraswathy Jayakumari, (2015),"Analyzing the mechanical behavior of E-glass fibre-reinforced interpenetrating polymer network composite pipe", Journal of Composite Materials.

  12. S Stephen Bernard, LS Jayakumari, (2016) " Effect of Rockwool and Steel fiber on the Friction Performance of Brake Lining Materials", Matéria (Rio de Janeiro), published by RevistaMatéria. Vol. 21, Issue 3, pp. 1-16.

  11. S Meenakshi, K Pandian,LS Jayakumari, S Inbasekaran, (2016), "Enhanced amperometric detection of metronidazole in drug formulations and urine samples based on chitosan protected tetrasulfonated copperphthalocyanine thin-film modified", Materials Science and Engineering: C, published by Elsevier. Vol. 59, pp. 136-144.

  10. G Suresh, LS Jayakumari(2015), "Evaluating the mechanical properties of E-Glass fiber/carbon fiber reinforced interpenetrating polymer networks", Polímeros , published by ABPol. Vol. 25, Issue 1, pp. 49-57.

  09. S.Sahila, LS Jayakumari (2015), "GRAPHENE OXIDE-CARDANOL BASED POLYMER BENZOXAZINE NANOCOMPOSITE ASH IGHDIELECTRICSTRENG THMATERIAL FOR ELECTRICALAPPLICATIONS", Advanced Composites Letters, published by Adcotec, London. Vol. 24, Issue2.

  08. S Sahila, LS Jayakumari (2015), "Development of in situ generated graphene/ benzoxazine &;epoxy nanocomposite forcapacitor applications", Polymer Composites, published by Wiley Interscience. Vol. 36, Issue 1,pp. 1 - 7

  07. Senthil Kumar, Sundara Raju, N Mohana, PS Sampath, LS Jayakumari, (2014), "EFFECTS OF NANO MATERIALS ON POLYMER COMPOSITES -AN EXPATIATE VIEW.", Reviews on Advanced Materials Science , publishedby RMIT. Vol. 38, Issue 1, pp. 40-54

  06. S Stephen Bernard, LS Jayakumari, (2014),"Effect of the properties of natural resin binder in a high friction composite material", Polímeros24 , published by ABPol. Vol. 24, Issue 2, pp. 149 - 152

  05. LS Jayakumari, PS Sampath, M Sarojadevi, (2009), "Synthesis and characterization of bis (4 cyanato -3, 5- dimethylphenyl) anisylmethane/ epoxy/ glass fiber composites", Journal of applied polymer science , Vol. 112, Issue 4, pp. 2579-2587

  04. M Sarojadevi, LS Jayakumari, V Thulasiraman, GAnuradha, PSSampath, (2009),"Structura lcharacterization and mechanical and thermal properties of new cyanate/ epoxyandcyanate/ BMIblendsandcomposites", Polyimides and Other High Temperature Polymers: Synthesis.

  03. KK Iyneshkumar, AA Raj, V Swaminathan, L Dinagaran, LS Jayakumari,(2008) " Mechanical Behaviour of Unmodified Epoxy/ Flyash And Silicone Modified Epoxy/ Flyash System", INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY, Vol. 12, Issue 2, pp. 1073 - 1080

  02. LS Jayakumari, V Thulasiraman, MSarojadevi, (2008), "Synthesis and characterization of bis (4 cyanato 3, 5 dimethylphenyl) naphthyl methane/ epoxy/ glass fiber composites", Polymer composites , Vol. 29, Issue 7, pp. 709-716.

  01.LS Jayakumari, V Thulasiraman, (2007). "Synthesis and characterization of cyanate epoxy composites", High Performance Polymers , published by Sage Publications. Vol. 19, Issue 1, pp. 33 – 47.

   

• Sponsored Project Completed

   

   

  1.         "Development of Graphene – Cyanate Ester Hybrid Nanocomposite ", funded by UGC – MRP (July-2012 - December-2015). Project Cost: 7.73.