Name                           :           Dr.K.M.Parammasivam

Designation                :           Professor & Head

Contact Details          :           Department of Aerospace Engineering

                                                 Madras Institute of Technology

                                                 Anna University

                                                 Chromepet , Chennai-600044

                                                 India

                                                 Phone: 044 – 22516388

                                                 Mobile : +919962540106

Email                            :           This email address is being protected from spambots. You need JavaScript enabled to view it.

Expertise                    :           Wind Turbine Aerodynamics, Porous Flame Combustion and Film Cooling

• Academic Qualification

  S.No.	Degree	Year	Institution with Full Address	Class
  1	B E (Mech)	1992	PSG College of Technology, Peelamedu, Bharathiyar University Coimbatore	First Class
  2	M E (Aero)	1995	Madras Institute of Technology, Anna University	First Class with Distinction
  3	Ph.D (Aero)	2005	Madras Institute of Technology, Anna University
  4	Post-Doc(Japan)	2007	Tokyo Polytechnic university, IIYAMA, ATSUGI,JAPAN

   

• Professional Experience

  .

  S.No.	Post held	From	To	No. of Years	Cumulative year of Experiences
  1	GRADUATE APPRENTICE	05-02-1993	16-07-1993	0.5	0.5
  2	TEACHER TRAINEE	21-07-1993	20-07-1996	3	3.5
  3	LECTURER	21-07-1996	20-07-2001	5	8.5
  4	SENIOR LECTURER	21-07-2001	28-11-2005	4.4	12.9
  5	ASSISTANT PROFESSOR	29-11-2005	28-11-2008	3	15.9
  6	ASSOCIATE PROFESSOR	29-11-2008	24-09-2013	4.9	20.6
  7	PROFESSOR	25-09-2013	Till Date	7.9	28.5

   

   

• Professional Training

  • COE Short Term Fellow in the Tokyo Polytechnic University, Japan from the period of 01.01.2004 to 31.03.2004.
  • Graduate Apprentice in the VSSC, ISRO Trivandram from the period of 29.01.1993 to 16.07.1993.
  • Teaching Assistant in the Department of Mechanical Engineering, IRTT, Erode from the period of 06.01.1993 to 27.01.1993.
    

   

• Administrative Responsibilities Held

  • Coordinator For Quality Improvement Programmes for MIT, Anna University, for IIT CE-QIP Programes in the year 2016.
  • Administrative responsibilities as Director, for the Centre for Aerospace Research, Anna University during 31.05.2011 to 10.06.2014
  • Administrative responsibilities as M I T Zonal Officer for Anna University Examinations during August 2010 to July 2012.
  • Administrative responsibilities as NSS Officer, MIT for a period of three years from 04.02.2003.
  • Staff In Charge of PDA, for a period of Three years, MIT Anna University (2009-2011).

   

• Patents

  List of Patents: Awarded - 2
  Parammasivam K.M, “Aerodynamic Drag Reduction Of Hatch Back Car Using Base Bleed” Patent application number 3777/CHE/2010A, Issue nos. 53/2010 pp 5292, The Patent Office Journal. Granted Patent No.299588
  Parammasivam K.M, “Optimization Of Vortex Generator For Sedan Car Model For Reduction Of Aerodynamic Drag” Patent application number 3778/CHE/2010A, Issue nos. 53/2010 pp 5292, The Patent Office Journal Granted Patent No. 373699 (27-Aug-2021)
  List of Patents filed - 3
  Sivaraj G, Parammasivam K.M,Nithish S, Veeramanikandan R,“ Automatic Dust Removal System on Hatch Back Car”, Patent Application Number HE / 2015, the Patent office Journal.
  Parammasivam K M, Navinkumar B, “Aerodynamic Braking System for Wind Turbine Using Chord-wise Spacing”, Patent application number 201641016085 A Issue nos. 24/2016 pp 25113, The Patent Office Journal, 10.06.2016.
  Parammasivam K M , Suganya G, “ POROUS MATERIALFLAME HOLDER FOR AFTERBURNER APPLICATIONS”, Patent application number 2147483647, Patent office, Chennai, 2017

• Sponsored Research Projects

   

  Sl.No	Year	Name of the Project	Funding  agency	Amount sanctioned in lakhs	Grant received in lakhs	Status	Investigator
  1.	2015-2018	Effect of  Combustor exit profiles in Tip and Platform with Film cooling effectiveness	UGC	14.405	12.855	Ongoing	Principal Investigator
  2.	2012-2014	Burner Design with a Porous Flame Stabilizer and Estimation of Combustion Characteristics	AR&DB	17.575	17.575	Completed	Principal Investigator
  3.	2009-2014	Augmentation of Facilities in aerodynamic and Structures labs	DST -FIST	80.00	53.00	Completed	Project co-ordinator
  4.	2005-2007	Virtual Instrumentation of MIT wind tunnels at MIT, Anna University	AICTE- MODROBS	9.36	9.36	Completed	Co-Investigator
  5.	2002-2004	Experimental evaluation of Aerodynamic characteristics of HRV vehicle configuration at low speed	DRDL Hyderabad	4.48468	4.48468	Completed	Co-Investigator
  6.	2002-2004	Simulation of Tall slender Structures under Cyclonic Storms using Computational Fluid dynamics and Wind Tunnel Testing	AICTE -RPS	10.00	10.00	Completed	Principal Investigator
  7.	1998-1999	Modernization of Subsonic Wind Tunnel at MIT, Anna University	AICTE- MODROBS	8.0	8.0	Completed	Co-Investigator
  8.	1996-1997	Data Generation of Wind tunnel and cyclone Effects on Structures for Code Formulation	AICTE –R&D	5.0	5.0	Completed	Co-Investigator

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

  Proposals Submitted

   

  Sl.No	Year	Name of the Project	Funding  agency	Amount in lakhs	Grant received in lakhs	Status	Investigator
  1	16.02.2013	Estimation of Nano-Metallized  Gelled Propellant Characteristics	VSSC-ISRO	22.77	-	Submitted	Project coordinator
  2.	25.07.2013	Aerodynamics of wind  Turbines with Active Flow Controls	DSA, UGC	75.0	-	Submitted	Project coordinator
  3.	10.10.2013	Computational Engineering with  Emphasis  on Flow Simulation, Modelling and Renewable Energy Research	MHRD GOI, INDIA	450.0	-	Submitted	Project coordinator

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

• Awards

  • Received “Distinguished Scientist Award” from Centre for Advanced Research and Design, Venus International Foundation for outstanding technical contribution made towards the achievement in the field of Porous flame Combustion on 19.12.2015.

   

  • Received “Best Paper Award” from The 8th Asian-Pacific Conference on Aerospace Technology and Science (APCATS 2015) from the president of the Society for  Aerospace Systems Engineering, Korea on 20.05.2015.

   

  • Received “Best Guideship Award” from Indian Society for Wind Engineering for Guiding best M.Tech thesis award in the field of Wind Turbines on 2008.

   

  • Received "JSPS Post Doctoral Fellowship Award" from the JAPAN Society for Promotion of Science (JSPS), Government of JAPAN(2005-2007).

   

  • Received "COE Short Term Fellowship Award" from the Tokyo Polytechnic University, Japan, 2004.

   

  • Received "First Class with Distinction" in M.E Aeronautical Engineering from Anna University, India, 1996.

• Acheivements/Recognitions

  • Expert Member to evaluate the Project Proposals  in the Mechanical Engineering, in the Tamilnadu State Council for Science and Technology, Govt. of Tamilnadu(2015).
  • Expert Committee Member for fresh Induction / review of departments under SAP program, UGC, Govt. of India (01.06.2015).
  • Expert Member in the Selection of Scientists for Recruitment Assessment Centre, DRDO, Govt. of India, during 13.05.2013 to 15/03/2013.
  • Member, Board of Studies for Aeronautical Engineering in St Peters University (04.02.2010 to 03.02.2012).
  • Member, Board of Studies for Aeronautical Engineering in Noorul Islam University, Nagarcoil. (04.04.2013 to 03.04.2016).
  • Member, Board of Studies for Aeronautical Engineering in Vel Tech University, Chennai (21.05.2014 to 20.05.2016).
  • Member, Board of Studies for Aeronautical Engineering in SRM University, Chennai (2014 to 2016).
  • Member, Board of Studies for Faculty of Mechanical Engineering in Anna University, Chennai (2011 to 2016).
  • Member, Board of Studies for Aeronautical Engineering in Bannari Amman Institute Of Technology University, Chennai (19.04.2014 to 18.04.2016).
  • Member, Board of Studies for Aeronautical Engineering in PSN College of Engineering and Technology, Tirunelveli (16.06.2014 to 15.06.2016).
  • Member, Affiliation Inspection, for consideration of grating provisional affiliation, Anna University, Chennai.

• Member/Fellowship of Professional Society

  • Fellow Member in The Institution of Engineers India.
  • Member in AIAA USA.
  • Executive Committee Member in ISWE.
  • Life Member in  Aeronautical Society of India.
  • Member in High Energy Materials Society of India
  • Member in the combustion Institute of India.
    

   

• List of  Ph.D Research Scholar

  Total number of Ph.D Research Scholars 16 8 Completed + 8 Guiding
  M.E / M S (BY RESEARCH) 62 5 (MS)
  Total number of National / International Journal articles Published
  Journals 52 International 43 National 9
  Conferences 101 International 62 National 39

   

  S.No	Name of the Scholar	Registration Number	Title of the Research Work
  1	P.Saravanan	2814239714 17.09.2008 A.R-10	Wind Turbine Blades with Winglets
  2	S.C.Khandai	09.09.2009 2915239726 A.R -10	Single Expansion Ramp Nozzle Flows
  3	D.Ravi	27.02.2010 1012239117 A.R-10	Effect of Various Coolant Hole  Configuration On Turbine Blade Cooling
  4	K Selvakumar	22.06.2010 1012239704 AR -10	Experimental Analysis of the Pressure Distribution on different models of car body in the wind tunnel
  5	B Navinkumar	29.06.2010 1014239730 A.R-10	Hybrid Power Generation System using Wind and Solar Energy
  6	G Raju	10.01.2011 1113239129 A.R-10	Investigation of Drag reduction in Sedan Type LTV by Vortex Generators
  7	T Velmurugan	1113239141 12.01.2011 A.R-10	Studies on Aero Elastic Generators for Wind power Harvesting
  8	G Sivaraj	13.06.2013 1312239758 A.R-10	Optimization of Base Bleed method for Drag reduction of Automobiles
  9	P N Selvaraju	18.12.2012 1313239254 A.R -10	Improvement on Aerodynamic Characteristics on car model using vortex generators with active flow controls
  10	P Shanmugam	10.01.2013 1317239280 A.R - 10	Theoretical and Experimental Studies on Morphing Winged UAV
  11	V.G.Krishna Anand	10.12.2013 1415239155 AR -10	Study of propane gas-air flame acceleration and detonation in channels and tubes
  12	M Dhanabalan	1514299712	Effect of Archimedes Twisting on Wind Turbine Blade Performances

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

• List of M.S (by Research) Scholars

   .

  S.No	Name of M.S        (by Research) Scholar	Registration Number	Title of the Research Work
  1	S.Nataraja Pillai	2002238707 26..06.2002 A.R.3	Experimental and Computational Evaluation Aerodynamic Characteristics of Hypersonic Vehicle Configuration at Low speeds
  2	M.Gopinath	2003238703 A.R.3	Experimental and Computational Studies on Delta Wing Configuration With Different Leading Edges
  3.	M.JayaKumar	2003238704 A.R.3	Numerical simulation Of Turbulent Flow around Conical Water Tank Structures
  4	T.A. Sundaravadivel	2003238708 A.R-3	Simulation of Atmospheric boundary Layer In Wind Tunnels
  5	K.Sivaprakash	2003238709 A.R.3	Aerodynamic Analysis of Tail Controlled Missile with Planar and grid fins at low subsonic Speeds
  6	K.Kirubakaran	1014238703 A.R.15	Experimental Studies on blowout Limit For V-gutter Stabilized Flames

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

• Journal Publications

    

  1.      Sivaraj, G, Parammasivam, K. , Veeramanikandan, R., Nithish, S "Development of a Self-Retractable Front Spoilers Suitable for Indian Road Conditions to Reduce Aerodynamic Drag". World Academy of Science, International Journal of Engineering and Technology, International Science Index, Aerospace and Mechanical Engineering, (2016),vol 3, No 3, 436 (Accepted)

  2.  T.Velmurugan, M.Ranjithkumar and K.M.Parammasivam,” Performance and Emission Evaluation of a VCR Diesel Engine using Algae Methyl Ester”, International Journal of Applied Engineering Research (IJAER), Volume 10, Number 76 (2015)   Special Issues, pp.113-117.

  3.    Suresh Chandra Khandai, Parammasivam K. M, “Effect Of Cowl Length On The Jet Characteristics Of The SERN”, International Journal of Applied Engineering Research (IJAER), Volume 10, Number 4  (2015),pp.10825-10840. 

  4.   Navinkumar B, Parammasivam K M,” Wind Turbine Aerodynamic Braking System Analysis Using Chord Wise Spacing”, Applied Mechanics and Materials, vol 787 (2015) pp:217-221, August 2015.

  5.   Kirubhakaran K and Parammasivam K M,” Design and Experimentation of Simulated Combustor Model for Aircraft Afterburner Applications”, International Journal of Turbo & Jet-Engines. ISSN (Online) 2191-0332, ISSN (Print) 0334-0082,DOI: 10.1515/tjj-2015-0020, August 2015.

  6.        Ravi D and Parammasivam K M, “,Taguchi Based Regression Analysis of End-wall Film Cooling in a Gas Turbine Cascade with Single Row of Holes”, International Journal of Turbo & Jet-Engines. ISSN (Online) 2191-0332, ISSN (Print) 0334-0082, DOI: 10.1515/tjj-2015-0032, July 2015.

  7.  Kirubhakaran K and Parammasivam K M,” Understanding Blowout Phenomena to the Induced Angle of V-Gutter-Stabilized Flames”, International Journal of Turbo & Jet-Engines. ISSN (Online) 2191-0332, ISSN (Print) 0334-0082,DOI: 10.1515/tjj-2015-0011, April 2015

  8.     Selvaraju P N, Parammasivam K M, Shankar, Devaradjane G,” Analysis of drag and lift performance in sedan car model using cfd”, Journal of Chemical and Pharmaceutical Sciences, ISSN: 0974-211, Special Issue 7: 2015, pp 429-435.

  9.   Selvakumar K and  Parammasivam K M (2015),” Experimental investigations on aerodynamic characteristics of a hatchback model car using base bleed”, Journal of Chemical and Pharmaceutical Sciences, ISSN: 0974-211, Special Issue 7: 2015, pp 365-367.

  10.Vadivelu P, Shanmugam P and Parammasivam K M (2014),” Three Dimensional Computational Studies on Aileron Morphing And Variable Wing Sweep Morphing”,  International Journal of Innovative Science  Engineering & Technology, Vol. 1 Issue 10,pp9-14, December 2014.

  11.  Suresh Chana Khandai, and  Parammasivam K  M (2014) ,” Experimental Study of Single Expansion Ramp Nozzle Flows (SERN) at Low Supersonic Speeds”,International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:14 No:05 84 146205-9191-IJMME-IJENS © October 2014 IJENS.

  12. Vadivelu P and Parammasivam K M (2014), “ Computational Studies on aileron Morphing in UAV (Variable trailing edge)”, International  Journal of General Engineering and Technology (IJGET) ISSN (P), 2278-9928; ISSN (E) 2278 -9936, VOL 3, Issue 5, Sep 2014, pp 23- 32.

  13. Vinayagamurthy G and  Parammasivam K M (2014),” Flutter Analysis of a Space Vehicle”, International journal of Frontiers in Aerospace Engineering ,   vol 3, issue 3, pp  64-69 , August 2014.

  14. Sivaraj.G, Parammasivam K M and Gokulraj M (2013),  “Computational Analysis of flow behavior over the multi-stage launch vehicle with strapons”, Journal of Mechanical Engineering & Technology, vol 1, issue 1, pp 54-65.IISN 2347-3924

  15.  Saravanan P, Parammasivam K M and Selvi Rajan S(2013), “Experimental investigation on small horizontal axis wind turbine rotor using winglets”, Journal of Applied Science and Engineering, Vol No.16, No.2, pp-159–164(2013) DOI:10.6180/jase.2013.16.2.07.

  16.   Suresh Chana Khandai, Ashwin Kumar K and  Parammasivam K M (2013) , “Computational Study of the Effect of Geometric Parameters on the performance of Single Expansion Ramp Nozzle Flows” (IJMIE) April 8th 2013 – Goa, ISSN No.2231-6477, Vol.3, Iss-1, 2013, pp.67-71.

  17.   Keerthana M, M.Sriramkrishnan, T.Velayutham, A.Abraham, S.Selvi Rajan and Parammasivam K M (2012), “Aerodynamic Analysis of a small horizontal axis wind turbine using CFD” Journal of Wind and Engineering, Vol.9, No.2, July 2012, pp.14-28.

  18.  Saravanan P,  Parammasivam K M and Selvi Rajan (2012),  “Pressure Distribution of Rotating Small wind turbine blades with Winglets using Wind Tunnel, Journal of Scientific and Industrial Research” (JISR), Vol.71 pp. 425-429, June 2012.

  19. Vinayagamurthy G, Parammasivam K M, S. Nadaraja Pillai (2011), “Flutter Analysis of Wing, Booster Fin and Vertical Tail” Applied Mechanics and Materials Vols. (AMM) 110-116 pp 3500-3505. Trans Tech Publications, doi 10.4028/www.scientific.net/AMM.110-116.3500.

  20.  Jayakumar M, Rajani, Sekhar Majumdar and Parammasivam K M (2009), “Numerical Simulation of Turbulent Flow past a Conical Water Tank Structure ” in Journal of Wind & Engineering, Vol. 6, No.2, July 2009, pp.42-50.

  21.Selvi Rajan.S, Santoshkumar.M, Lakshmanan.N, Nadaraja Pillai.S and  Parammasivam K M (2009), “CFD Analysis and Wind Tunnel Experiment on a Typical Launch Vehicle Model” in Tamkang Journal of Science and Engineering Vol. 12, No 3, pp 223-229.

  22.   Sundaravadivel T A, S.Nadaraja Pillai and   Parammasivam K M (2009) , “CFD Prediction of Wind Pressures on Conical Tank”, Journal of Wind and Engineering, Vol 6, No1,Jan 2009, pp.32-40 ISSN 0973-0613, India.

  23.  Saravanan P, S. Nadaraja Pillai, Parammasivam K M (2009) , “Aerodynamic Characteristics of Hypersonic Vehicle with Variable Sweep Back Wing Configuration” Journal on Future Engineering & Technology, Vol 5. No.1 pp44-50.

   24.   Pillai S N, Kumar M S, Sundaravadivel T A,  Parammasivam K M, Jayaraman K (2004),  ” Aerodynamic analysis of Flat and curve shaped Hypersonic fore bodies at low speeds”, ASCE (American Society of Civil Engineers), (Special issue for Earth & Space-2004) Vol 153,  pp 1023-1030.

   

   

• Conference Publications

   INTERNATIONAL CONFERENCES         45

  1.      Vinayagamurthy Ganesan,K.M.Parammasivam, ”Effect of wind speed and rainfall on stay cable Vibration”, International Conference on Advances in Mechanical Engineering (ICAME 2015), Organised by the UCE Villupuram, 15th -16th October 2015.

  2.      T.Velmurugan, K.M.Parammasivam,’ A CFD/CSD Analysis of Controlled Flutter Phenomenon”, International Conference on Advances in Mechanical Engineering (ICAME 2015), Organised by the UCE Villupuram, 15th -16th October 2015.

  3.      P.N.Selvaraju, K.M.Parammasivam, G.Shankar,” Numerical and Experimental Investigations of Drag Force On Scaled Car Model”, International Conference on Advances in Mechanical Engineering (ICAME 2015), Organised by the UCE Villupuram, 15th -16th October 2015.

  4.      B.Navin kumar , K.M. Parammasivam,” Aerodynamic Braking System Analysis of Horizontal axis wind Turbine Using Chordwise Spacing”,  International Conference on Advances in Mechanical Engineering (ICAME 2015), Organised by the UCE Villupuram, 15th -16th October 2015.

  5.      Parammasivam M. K and K. Kirubhakaran,” Experimental Studies on Behavior of Flame Structure due to Vortex in V-Gutter Combustors (AIAA 2015-4090)”, 51st AIAA/SAE/ASEE Joint Propulsion Conference, 2015, 10.2514/6.2015-4090, July 28, Florida, USA.

  6.      Parammasivam M. K, S. Subramanian, Sai Suganth P. Baskaran, Shaik Shahabaz Ahamed, Jayakumar Venkatesan,” Experimental Investigation on Flame Stabilization with V Gutters for Afterburner Applications (AIAA 2015-4018)”, 51st AIAA/SAE/ASEE Joint Propulsion Conference, 2015, 10.2514/6.2015-4018, July 28, Florida, USA.

  7.      Parammasivam M. K, D. Ravi,” Computational studies on End-wall Film Cooling from a Single Row of Holes at Different Stream-wise Locations in a Gas Turbine Cascade  (AIAA 2015-3731)”,51st AIAA/SAE/ASEE Joint Propulsion Conference, 2015, 10.2514/6.2015-3731, , July 27, Florida, USA.

  8.      Narasimhan P.S, Shanmugam P, Parammasivam KM, Raja S, “Morphing of a 3D Wing with Adaptive Washout Using SMA Smart Actuators”, APCATS 2015 (The 8th Asian-Pacific Conference on Aerospace Technology and Science) Republic of Korea during May 20-23, 2015.

  9.      Navinkumar B and Parammasivam K M (2015),” Wind turbine aerodynamic Braking system analysis using chord wise spacing”, Proceedings of the International Conference on sustainable Energy Resources, Materials and Technologies                    ( ISERMAT 2015), 8-9 January 2015, SSN college of Engineering, Chennai, India

  10. Velmurugan T and Parammasivam K M (2014) , “ Simulation of a leading edge flutter”, Proceedings of the International Conference on Mathematics And its Applications-2014, 15-17 December-2014, University College of Engineering, Villupuram, Anna University, Chennai, India

  11. Venkatesan J,  Parammasivam K M  and  Rao S (2014), Concepts for Future Robotic Mars Manned Missions, The Mars society, The 17th Annual International Mars Society Convention, South Shore Harbour Resort (SSHR), League City, TX, August 7-10, 2014.

  12. Velmurugan T,    Parammasivam K  M and  M. D. Dinesh Muthamil  Raja  (2013),  “ Numerical Investigation on the Design Parameters of an Aero-Elastic  Wind Energy Generator ”  APCWE-VIII,  Proceeding  of  the Eighth  Asia-Pacific  Conference  on   Wind Engineering, pp 13-14 , Anna University, Chennai, Dec 10 – 14, 2013, India.

  13. Selvakumar K    and  Parammasivam K M (2013), “Experimental  Investigations   on   Optimisation  of  Aerodynmaic  Charactericstics in a  Hatchback  Model Car 3 Using  Vortex     Generators”    APCWE-VIII,   Proceeding   of   the   Eighth    Asia -  Pacific Conference  on   Wind  Engineering, pp 65-67   Anna University, Chennai, Dec 10 – 14,  2013, India.

  14. Dhilibana A ,   Meena  P,    Narasimhan  P  S,    Vivek  M,    Nadaraja     Pillai S  and   Parammasivam K M (2013),” Aerodynamic   Performance   Of   Rear   Roughness    Aerofoils”  APCWE-VIII,  Proceeding   of    the  Eighth   Asia-Pacific     Conference   on   Wind Engineering, pp 93-96   Anna University, Chennai, Dec 10 – 14,  2013, India.

  15. Ragu    Govindharajan , Parammasivam K M and   S. Sathya Narayanan (2013),  “ Design  of   Vortex  Generators for  Light  Transport Vehicles   (LTVS)   Using CFD” APCWE- VIII,   Proceeding  of  the  Eighth   Asia - Pacific  Conference  on   Wind Engineering, pp 329 - 332    Anna University, Chennai, Dec  10 – 14, 2013, India.

  16. Sivaraj G,  Parammasivam K. M and M. Gokulraj (2013),  “ Way to Increase the Rotation Efficiency Of  the  Wind  Turbine By Using Turbulators” APCWE-VIII,  Proceeding of the Eighth  Asia - Pacific  Conference   on   Wind   Engineering,   571-574   Anna  University, Chennai, Dec 10 – 14,  2013, India.

  17. M. A.  Mohammed   Jaasim,    S. Nadarajan Pillai  and  Parammasivam K M (2013), “Enhanced  Power Production of Wind  Turbine by Aerodynamic Braking ” APCWE-VIII, Proceeding  of  the   Eighth  Asia - Pacific Conference  on   Wind   Engineering, pp 575-578 Anna University, Chennai, Dec 10 – 14,  2013, India.

  18. Raju   G,  Parammasivam K M, Vivek  V and  Vishnu Priya R (2013), “ Numerical Investigation and  Design     Optimization    of  Brimmed Diffuser – Wind Lens around a Wind Turbine”  APCWE-VIII, Proceeding  of  the  Eighth  Asia-Pacific Conference  on   Wind Engineering,  pp 587-590  Anna University,  Chennai,  Dec 10 – 14, 2013, India.

  19. Selvakumar K and Parammasivam K M (2012), “Experimental Analysis of the pressure distribution on different models of car body in the Wind Tunnel” DOI:10.1007/978-81-322-1007-8-15@Springerindia 2012 pp: 165-184.

  20. Suresh Chana Khandai, Ashwin Kumar K & Parammasivam K M (2012) “Computational Study of the Effect of Geometric Parameters on the performance of Single Expansion Ramp Nozzle Flows”.  (ICMIE) April 8th 2012 – Goa, pp.88-92.

  21. Suresh Chana Khandai, Ashwin Kumar K & Parammasivam K M, (2012) “Computational Study of Single Expansion Ramp Nozzle Flows” (ICSIE) & (LVEC) 31st March 2012, ISBN. 978-81-904760-4-1.

  22. Vinayagamurthy G,  Parammasivam K M (2012), Yukio Tamura, “Structural Analysis of Winds Turbine Blade of Profile NACA 65(2)-418”. ICAMB March 2012, VIT Vellore.

  23. Prakash M, Saravanan P, Parammasivam K M and Selvi rajan (2011), “Pressure Distribution study near the tip of small wind turbine rotor blades”, in 11th Asian International Conference on Fluid Machinery and 3rd Fluid Power Technology Exhibition at IIT Maas,AICFM_TM_028,Nov 21-23.

  24. Vinayagamurthy G,  Parammasivam K M Yukio Tamura (2011), ”Flutter Analysis of a RLV in free flight Condition” pp.70-75, 1st International Symposium on Flutter Control and Applications.

  25. Vinagamurthy G,   Parammasivam K. M and Pillai S N(2011),“ Flutter Analysis Of Wing , Booster Fin And Vertical Tail”,  CMAE 2011, march 19th to 20th 2011, pp 189-192, IEEE transactions 978-1-4244-9506-1/11.

  26. Saravanan P, Parammasivam K  M (2010), “Experimental Studies on Wind Turbine Rotor Blades Using Winglets” (ICFMAFP)  December 16-18, 2010, IIT Maas, Chennai, India, pp.1 – 6.

  27. Saravanan.P,  Parammasivam K M (2010), “Experimental Study Of A Winglet Added Small Wind Turbine With A Flanged Diffuser For Domestic Application” in International Conference on Emerging Technology in Renewable Energy, Anna University Chennai.

  28. Vinayagapamurthy.G,  Parammasivam K  M (2009), “Flutter Analysis of a Typical Space Vehicle with a winged Configuration” Advancement  in the mechanical and Building sciences in the 3rd millennium, ICAMB 2009,Dec 14-16.pp 244-247

  29. Parammasivam K M and Tamura Yukio (2007), “Aerodynamic characteristics of a Water Tank”, JSFM 2007, proceedings of Japan Society for Fluid Mechanics 2007, University of Tokyo, Japan.

  30. Gopinath M and Parammasivam K M (2006), “Pressure Measurements on Delta Wing with Different Leading Edge Radii”, Fourth International Symposium on Computational Wind Engineering (CWE 2006)”, July 16-19, 2006, Yokohama, Japan, pp 753-756.

  31. Gopinath M and  Parammasivam K M (2006), “Experimental and computational studies on Delta Wing Configurations with Different Leading Edge Profiles”, Earth & Space 2006 188, 14 (2006), USA, (ISBN 0-7844-0830-0), DOI. 10.1061/40830(188)14.

  32. Sivaprakaash K and  Parammasivam K M (2006), “Wind tunnel Investigation of Grid Finned Missile Configuration over Planar Control Surfaces”, Earth & Space 2006 188, 5 (2006), (ISBN. 0-7844-0830-0), DOI. 10.1061/40830(188)5, ASCE Aerospace Division, Texas, USA.

  33. Parammasivam K M Jayaraman K., Yukio Tamura, Matsui M and Yoshida A (2005), ”Wind Loads on Conical Water Tank Towers in semi-urban Terrains”, Sixth Asia Pacific Conference on Wind Engineering, Korea Advanced Institute of Science and Technology, Seoul, Korea , pp 1774-1789, September 12- 14, 2005.

  34. Parammasivam K M, Jayaraman K, Yukio Tamura, Matsui M, and Yoshida A, (2005), “Wind Directional Effects On Surface Pressure Distributions On Conical Water Tank Towers In Semi-Urban Terrains”, Sixth Asia Pacific Conference on Wind Engineering”, Korea Advanced Institute of Science and Technology, Korea, pp 1736-1757, September 12- 14, 2005.

  35. Parammasivam K M and Jayaraman K (2005), “Static Wind Loads on Conical Water Tank Tower in Terrains“ Sixth Asia Pacific Conference on Wind Engineering”, Korea Advanced Institute of Science and Technology, Seoul, Korea, September 12- 14, 2005, pp.3060-3072.

  36. Pillai S N, Kumar M S, Parammasivam K M, Jayaraman K (2004), “Experimental studies on Hypersonic configuration with variable sweepback wing  at low speeds”, SAE World Aviation Congress 2004 (WAC2004), Housten, USA.

  37. Pillai S N, Kumar M S, Sundaravadivel TA, Parammasivam K M, Jayaraman K (2004),”Aerodynamic analysis of Flat and curve shaped Hypersonic forebodies at low speeds”, Malla, Ramesh B. and Maji, Arup (Eds.), Engineering, Construction, and Operations in Challenging, Environments - Earth & Space 2004 (ISBN 0-7844-0722-3), DOI. 10.1061/40722(153)139, ASCE, Reston, VA, March 2004, pp 1023-1030.

  38. Kumar M.S,  Parammasivam K M, Pillai S.N, Jayaraman K (2003), “Integration of Wind Tunnel Results on a Space Grid Roof for Predicting it is Modal Response”, The 11th International Conference on Wind Engineering (ICWE-2003), 2-5 June 2003, Lubbock, Texas, USA, Vol 1, pp 1267-1274.

  39. Parammasivam K M, Sivakumar R, Jayaraman K (2003), “ Wind Tunnel Measurements on Wind Effects on Space Frames with Simulation of Terrain”, The 11th International Conference on Wind Engineering (ICWE-2003), 2-5 June 2003, Lubbock, Texas, USA Vol 1, pp1259-1266.

  40. Jayaraman K, Parammasivam K M, Karthick M, Pillai S N, Kumar M S, (2003) “The Characteristics of the Low Speed Wind Tunnel”, The International Seminar on  Indian Aviation –Challenges & Perspective”, 10-11 January 2003, Kolkata, INDIA.

  41. Jayaraman K,  K. M. Parammasivam (2003), Pillai S N, Kumar M S.,  “Flutter Analysis of Aircraft Wing and its Effect at Wing fuselage Interjections”, The International Seminar on Indian Aviation –Challenges & Perspective”, 10-11 January 2003, Kolkata, INDIA.

  42. Jayaraman K,  Parammasivam K M, Pillai S N, Kumar M S (2003), “Computational and Experimental studies on Aerodynamics Characteristics of Hypersonic blunt nosed model at low speeds ”, The International Seminar on Indian Aviation –Challenges & Perspective”, 10-11 January 2003, Kolkata, INDIA.

  43. Parammasivam K M and Jayaraman K (2002), “ Wind tunnel Studies on Wind Pressure Loads on water tanks in Terrain Category II”, The Second International Symposium on Advances in Wind & Structures (AWAS02), Vol 1,pg 451- 461,. 21-23, August 2002, BUSAN, KOREA.

  44. Parammasivam K M, Jayaraman K, and Padmanaban K (2001), “Studies On Wind Loads On Water Tank With Terrain Simulation” (2001) 4th International Conference on Mechanical Engineering, Buet, Dept of Mechanical Engg, Bangladesh, Dhaka, December 2001.

  45. Parammasivam K M, Jayaraman  K and Stephen L (2001),,“Pressure Measurements On Water Tank in low Speed Wind Tunnel For terrain Category I & II”,  III rd  International Conference on Trends in TIMA  2001, MIT Anna University , Vol 1, pp 61 – 71, August 2001, Chennai, India.

   

   

  NATIONAL CONFERENCES       30

   

  1.      Parammasivam , , Sunganya, Abdul Basidh and Devanathan, “ Experimentation of Flame Stabilisation using Flate Plate Gutter made of Porous Material for afterburner Application”, 29th  National Convention of Aerospace Engineers and National Seminar on Aerospace Engineering : Innovative Practices and Future Trends”,  November 2015, The Institution of Engineers India, Chennai.

  2.      Parammasivam , Abdul Basidh, Sunganya and Devanathan, “ Experimentation of Flame Stabilisation using Half V-gutter made of Porous Material for afterburner Application”, 29th  National Convention of Aerospace Engineers and National Seminar on Aerospace Engineering : Innovative Practices and Future Trends”,  November 2015, The Institution of Engineers India, Chennai.

  3.      Margandan R, Velmurugan T,  Parammasivam K M and Abilash K, “ Experimental Investigation of Performance and Emission  Characteristics of Mahua Oil Methyl Ester using  VCR Diesel Engine” , National conference on Advances in Mechanical engineering (NME 2015), April 2015,Tirunelveli Regional Centre, Anna university, PP 298-301.

  4.      Velmurigan T, Margandan R, Parammasivam K M and Kalaimani, “ Combined effects of semi insulation and vegetable oil blends on performance and emission characteristics of single cylinder four stroke diesel engine”, National conference on Advances in Mechanical engineering (NME 2015), April 2015,Tirunelveli Regional Centre, anna university, PP 293-297.

  5.      Subaramanian, Sai P Suganth, Shaik Shahabaz Ahamed and Parammasivam K M ( 2015), “Experimental Studies Of Flame Holding In Cold Flows”,2nd National Propulsion Conference, 2015, Organised by IIT Bombay, 23-24, February 2015.

  6.      M Santhoshkumar, Krishna Anand and Parammasivam K M ( 2015), “Numerical simulation of Deflagration to Detonation Transition with Hydrogen-air Mixture for Pulse detonation Engine application”, 2nd National Propulsion Conference, 2015, Organised by IIT Bombay, 23-24, February 2015.

  7.      Navikumar B and Parammasivam K M (2014), “Aerodynamic braking system analysis of wind turbine using chord-wise spacing”, 7th National conference on wind Engineering ( NCWE 2014), Thapar university Patiala, 21-22 November 2014, vol1 pp 134- 139.

  8.      Dhiliban A,Meena P,Narasimhan.P.S, Vivek.M, Nadaraja Pillai.S & Parammasivam K M, (2013) “Effects of Surface Roughness on the Aerodynamic Efficiency of NACA 0018 Airfoil”, 6th Symposium on Applied Aerodynamics and Design of Aerospace Vehicles(SAROD 2013),pp 252-256 November 21-23,2013.

  9.      Suresh Chana Khandai  , Parammasivam K M (2013), “ Calibration of Supersonic Free Jet     Facility ”     28th Indian  Engineering Congress,  Pg.3, 20-22 Dec 2013, MIT,  Anna University, Chennai, India.

  10.  Benjamin J George, Marimuthu,  Parammasivam K  M (2013), “Degenerated Shell Element Accounting Thickness Deformation for Dynamic Characterization of Structural Configurations” Indian Conference on Applied Mechanics(INCAM),Pg.92-93,IIT Maas,4-6 July 2013.

  11.  Shanmugam  P,   Vadivelu P,  Parammasivam K M (2013),  “A Study  and   evolutionary approach to  deflect  the  control  surfaces   by morphing   technology ”  28th Indian Engineering  Congress,  Pg.4,  20-22 Dec   2013, MIT,  Anna  University, Chennai, India.

  12.  SelviRajan.S, Harikrishna.P, Senthilkumar.S SERC,CSIR and  Parammasivam K M (2013) “Aerodynamic ag Reduction on a Sedan Car by Provision of Vortex Generators through Wind Tunnel Studies”,   National Conference   on  wind  tunnel  testing, VSSC,  Thiruvanathapuram, 23 – 24  August 2013.

  13.  Saravanan.P and   Parammasivam K M (2013)    “Experimental  Studies  on Aerodynamic  Characteristics  of  winglets, added  wind   turbine rotors”,   National Conference   on  wind  tunnel  testing, VSSC,  Thiruvanathapuram, 23 – 24  August 2013.

  14.  Keerthana M, M.Sriramkrishnan, T.Velayutham, A.Abraham, S.Selvirajan,  Parammasivam K M (2012)“ Aerodynamics Analysis of a small horizontal axis wind turbine using CFD” 6th National Conference on Wind Engineering, Vol.9, No.2, Dec14-15, 2012, pp.157-167.

  15.  Mohammed Jaasim, S.Nadaraja Pillai, Parammasivam K M (2012),“Aerodynamics Braking of wind turbine blade by Chordwise Spacing” 6th National Conference on Wind Engineering”, 2012 Dec 14-15, pp 355-359

  16.  Vignesh Kumar M, N.I.Haroon Rashid, S,Nadaraja Pillai and Parammasivam K M (2012) “  Characteristics of circular cylinder with various roughness for higher Reynolds number” 6th National Conference on Wind Engineering, 2012 Dec 14-15, pp 367-372.

  17.  Yogeswaran S, Saravanan,P and Parammasivam K M (2010), “Fabrication of small wind turbine blades using resin casting” in National Conference on recent innovations in Prod Engg, MIT, Anna University, March 2010 pp C45-C47.

  18.  Saravanan P,  Parammasivam K M (2010) “Advancement in composite material for wind   turbine  blade”  Recent  innovation  in production engineering, 16th & 17th April 2010 Anna University

  19.  Jayakumar M,   Rajani ,  Sekhar   Majumdar   and     Parammasivam K M (2007), “Numerical simulation of Turbulent flow past a Conical water tank structure”, Proceedings of the fourth National conference on Wind Engineering – 2007,  SERC,  Chennai,   30th Oct - 1st Nov 2007, pp 205-212

  20.  Sundaravadivel T A, S.Nadaraja Pillai, Parammasivam K M (2007), “CFD Prediction of Wind pressures on Conical  tank”, Proceedings of the fourth National conference on Wind Engineering – 2007, SERC, Chennai, 30th Oct - 1st Nov 2007, pp 213-220

  21.  Sundaravadivel TA, and Parammasivam K M (2006), “Modeling of Atmospheric Boundary Layer “, 3rd National Conference in Wind Engineering -2006, January 5-7, 2006, Jadavpur University, Kolkata, India.

  22.  Sivaprakaash K and Parammasivam K M (2005), “Aerodynamic Investigation of Missile configuration with Grid fin and planar control surfaces”, SAROD 2005, DL, Hyderabad, India, pp 241 – 245.

  23.  Sundaravadivel T and Parammasivam K M (2005), “Characteristics of Boundary Layer Wind Tunnel”, National  Conference  on  Advances  in  Engineering  Design”, Bannari   Amman  Institute  of  Technology,  Sathyamangalam,  Vol 2, pp 942-947

  24.  Gopinath M and  Parammasivam K M(2005),”Experimental  determination  of surface pressure data obtained on 60 delta wing configuration at different angles of attack”,  National   Conference  on   Advances   in   Engineering  Design”, Bannari Amman Institute of Technology, Sathyamangalam, Vol 2, pp 915-922.

  25.  Sivaprakaash K  and  Parammasivam K M (2005), ”Computational investigation of Tail controlled Missile with Planar and Grid fins in Low subsonic flow”, National Conference on   Advances  in Engineering  Design”,  Bannari  Amman  Institute   of Technology, Sathyamangalam, Vol 1, pp 529-536

  26.  Jayakumar M., Parammasivam K M (2005) and Sekar Majumdar.,

  ”Numerical Simulation of Turbulent Flow around Water tank Structures using   RANS Code”, National Conference on Advances in Engineering Design”, Bannari Amman Institute of Technology, Sathyamangalam, Vol 1, pp 383-388.

  27.  Sundaravadivel.T and Parammasivam K M,(2004), “Computational  studies  on wind flow over water tanks”, The 18th National Convention of Aerospace  Engineers and National  seminar on  Aerospace  Research  in  21st  Century  prospects  and challenges, I.I.T, Kharagpur, Nov17 to 19, 2004, India

  28.  Sivaprakaash K, Gopinath M, Vivek dev, Parammasivam K M, (2004), “Aerodynamics of Nose Cones”, Eighteenth National Convention of Aerospace Engineers and National Seminar on Aerospace Research in Twenty first Century Prospects and Challenges Nov 17-19, 2004 Organized by The Institution of Engineers Kharagapur  Local Centre in Association with Department of Aerospace Engineering, Indian Institute of Technology, Kharagpur.

  29.  Sivaramakrishnan R, Dhanaraj R, Kalai selvan K, Paramasivam M., (2001), “Stress analysis, Design and Construction of Six Degrees Of Freedom Pick and   Place Parallel Manipulator", Advances in Integrated Manufacturing Systems, AIMS –2001, Department of Production Technology, MIT , ANNA UNIVERSITY, Chennai, February 2001, India.

  30.  Paramasivam M, Sridhar B.T.N, Padmanabham G (2000),  “Hydroxyl terminated     natural rubber as fuel for hybrid propulsion”, The National Conference on Advances in Plastics and Rubbers –Materials and processing, Division of Rubber Technology, Anna University, Chennai, Jan 2000.

   

   

   

• Journal Ratings

  •      Google Scholar Index- Click Here